Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

finish recommendation

Posts

finish recommendation

#1

finish recommendation

Dave L

>Box Elder-----what finish do you recommend in order to not darken the white and red of the wood? I think the oil mixture finish I usually use will darken the wood more than I want. thanks for the suggestions.

Dave

Re: finish recommendation

#2

Re: finish recommendation

john lucas

>I use Lacquer. If you want to maintain the contrast Bleach the wood. The white will get whiter but the red will stay the same. Then when you put a finish on you won't loose so much of the white.

Re: finish recommendation

#3

Dick Hines

Re: finish recommendation

Dick Hines

>Just buff it out. I do this with holly. I use the Beall system. Just stay away from the red bar.

Re: finish recommendation

#4

Re: finish recommendation

David Breth

>I've tried the minwax poly wipe on with some success. The "white" goes a little yellow, but not much really, and the red stays pretty red.

David B.

Re: finish recommendation

#5

Re: finish recommendation

Dave L

>Thanks for the suggestions.

Dave

Re: finish recommendation

#6

Re: finish recommendation

Carole Valentine

>I agree with Dick, just sand very finely then buff. But if you really want to apply a finish without yellowing or darkening the wood, try a water based poly. I have used it on a couple of pieces of BE and it worked well. I always bleach Box Elder with the 2 part wood bleach.