Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Outboard Lighting...

Posts

Outboard Lighting...

#1

Outboard Lighting...

Peter Teubel

>Awhile ago, I purchased a light stand from Gary Evans (http://www.turningwood.com/light_stand.htm). It mounts in the back of the lathe. But once I got the dust hood, the light couldn't swing around it to get to the outboard side. Since I have 2 lights mounted on top of the dust hood, I just mounted the light stand in FRONT of the lathe under the headstock. Now I have plenty of light anywhere on the outboard side.

- Pete


Re: Outboard Lighting...

#2

Richard Allen

Re: Outboard Lighting...

Richard Allen

>That is absolutely beautiful!! I have lusted after the Moffets and light stand for years. Once I got the dust hood the light stand has become less of a possibility. I very much like your solution of the Moffets attached to the top of the dust hood.

Re: Outboard Lighting...

#3

Remember...

Peter Teubel

>None of the lights are permanently mounted. Just the stud connector is. I can still un-clip the lights and move them wherever, using the magnetic mounts or other stud mounts.

In fact, I have another light that I sometimes use with the magnetic mount on top of the dust hood...shining thru the BACK window.

Re: Outboard Lighting...

#4

Evans vs Sanders :)

Dave Peebles Lyons, Ohio!

>Hi Pete,

Nice set up you have there. I have not pulled the trigger on the Moffits.... yet. :) But isn't that Gary Sanders who sells the lights? Instead of Gary Evans.

I may be wrong, but I thought I would ask.

Best wishes,

Dave

Re: Outboard Lighting...

#5

My bad...

Peter Teubel

>Yes, you're right. Senior moment....at 44.

Re: Outboard Lighting...

#6

:)

Dave Peebles Lyons, Ohio!

>