Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

laser light

Posts

laser light

#1

laser light

olejon10

>could anyone recommend a good laser light I have been trying to turn hollow forms and vases Im spending more time trying to get my laser light to burn than I do turning I did a search there is so many out there Its confuseing I have changed the batterys thanks

Re: laser light

#2

Re: laser light

Gary in Zirconia, NC

>I just use the cheap 1 or 2 dallar ones I find at the flea market but I get tired of changing batteries. Does anyone know where one could find one that runs on 110 volts and is cheap?

Re: laser light

#3

Re: laser light

Allen Neighbors

>My first one was a laser pen from Radio Shack. Used 2 AA batteries. I dropped it once. Fini.

I now buy the cheap $1.25 pens 5 or 10 at a time. My SIL gets them for me at a Dollar store in Dallas. But they use the same batteries my Nikon F3 used, and three of them at that!

Greg Jensen had one at TD's in April, that he plugged in to a 120 outlet. It was a 110/12v adapter gizmo, I think. I'd like to get something like that rigged up. Maybe he'll see this post, and chime in.

Re: laser light

#4

Re: laser light

Jim Pugh, Elyria, OH

>Gents, I highly recommend this site: http://www.calpaclasers.com/

Look at 'pointers' and I use the CP-TI-327-VBD. Have had it now for more than 5 years. They aren't cheap at ~$30 but you will only buy one. Also, if you look thru this site I think you'll find the aux. battery pack/110v variations.

Re: laser light

#6

Re: laser light

Jim Pugh, Elyria, OH

>If you go here: http://www.calpaclasers.com/laser_diodes.html#

you will find the apparatus to use a battery pack or a 3V power supply.

Re: laser light

#7

Re: laser light *LINK*

Kevin Gerstenecker

>I second what Jim posted. Calpac Lasers manufacture the Laser that is included with the Kelton Hollower. They have great customer support, and they can give you the best recommendation for the application you wish to fill. For turning, because of vibration, they recommend a solid state unit. (The unit supplied with the Kelton Hollowing rig is not best suited for vibration. I know, I have been thru 2 of them, and they suggested another model for dealing with vibration.) For what it's worth, the unit supplied with the Kelton rig from Craft Supplies has a push button switch on the top of the laser barrel. It doesn't like vibration much. The first one gave me fits, so Craft Supply sent me another......it is better, but still has problems. Here's the link to Calpac:


Calpac Lasers

Re: laser light

#8

Battery question

dwr

>Jim,

What is your experience with battery life?

Thanks.

Re: laser light

#9

Stupid Question?

Barry Irby

>Don't the lasers on tools like the ones that show Norm where to chop stuff with his chop saw draw power from the tool? IE 120 volts, or at least 120 reduced to whatever? Those lasers are taking the abuse of riding on chop saws and drill presses, why not use one of them and its power supply?

Re: laser light

#10

Re: laser light

bob davis

>i have a 2 AAA pointer from best buy. used for several years,,,12.95

Re: laser light

#11

Re: Battery question

Jim Pugh, Elyria, OH

>My laser sits in the drawer more than it is used but I found the batteries to last much longer than I expected. Since I originally bought the laser, >5 years ago, I have replaced the batteries once.

Re: laser light

#12

Dick Hines

Re: laser light

Dick Hines

>I bought the laser light when I bought my Kelton hollowing rig. I have had it for 3 years, I think, and have only changet the batteries 2 times and I do a lot of hollow forms.