Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Baby rattle

Posts

Baby rattle

#1

Baby rattle

Jeff

>I'm planning on turning a rattle for my first child (boy). I want to use two contrasting woods, I have mahogany and ash or hickory. Does anybody think there would be a problem using the mahogany as balls on both ends of an ash or hickory center. The mahogany would be hollowed out as to put beads in. Finished with vegetable oil.

Thanks in advance,

Jeff

Re: Baby rattle

#2

Re: Baby rattle

Jeff from MA

>I can't comment on the ash/mahagony combination. But because this is for a baby you might want to change your mind about the vegetable oil, some have reported it can become rancid. If it were me I would use no finish and buff only, or buff with only carnuba wax, You could also use a non-toxic drying / penetrating oil. I would leave walnut oil off the list because it doesn't dry and some people believe early exposure to nut oils can can sensitize children.

Re: Baby rattle

#3

Re: Baby rattle

Jeff Myroup

>Jeff, Check this link out.

http://www.mimf.com/archives/toxic.htm

Jeff

Re: Baby rattle

#4

Re: Bad $%^&

Bill Hale / The Wood Spinner

>WOW ! Can I turn anymore ? I think I will pretend I never saw that.

Can I say good turning and be safe ?

Bill in Casa Grande, AZ.

Re: Baby rattle

#5

Re: Baby rattle

Allen Neighbors

>Jeff, I agree with Jeff... :o) About the oil. Carnauba is a good wax to buff with... and it's not poisonous, which is good.

You might also think about bees wax to buff it with. It will make the rattle easier for a baby to hold onto, since it isn't as slick as carnauba. Beeswax will wear down to slick after a few days, but it can be rebuffed with beeswax again, making it again easier for the baby to hold.

Re: Baby rattle

#6

Re: Bad $%^&

Jeff Myroup

>I was pretty shocked the first time I saw it. Never in my life did I ever think wood could make you sick.

Re: Baby rattle

#7

Re: Baby rattle

John Kyler

>As for oil I might consider mineral oil or salad bowl finish.

I had picked up alternative ivory to make one for my little girl.

I had hoped to make one like Bill Jones made for the Royal Family

I never got to it and she is now six...

So be sure to get it done.

And congratulations on the little one.

My six year old is now in the shop turning with me.

Re: Baby rattle

#8

Re: Baby rattle

Bill Youngblood

>I have made rattles and other toys for each of my 3 grandchildren and always finished them with some stuff I got from Woodcraft. (I think) It's call "Toy Finish". So far the kids are all alright and doing well in school. Be carefull of your wood selection. Walnut is a definate NO NO. I usually used Maple. Hope this helps.

Re: Baby rattle

#9

Re: Baby rattle *LINK*

Tommy Holmes

>There's an article on making baby rattles about half way down this page. It also addresses the size a rattle should be made.


http://www.nickcookwoodturner.com/articles.htm

Re: Baby rattle

#10

Another take on walnut

Don Henthorn

>There is a lot of information one can get from all kinds of pseudo scientific groups on the net that are highly suspect. Can�t speak directly to the article in question, but I wouldn�t accept it as gospel until I had it from a little higher authority.

Here is a picture of a rattle I turned for a grand daughter about 25 years ago.






This rattle was made from walnut which I cut and milled into lumber myself.

She wouldn�t let this out of her sight until she was at least two years old. She played with it, sucked on it, teethed on it, chewed on it, banged with it, threw it and did just everything a tot can do to it and it held up pretty good. She never suffered one moment from all the things she did with it.

I have used walnut for cutting boards, fruit bowls, cereal bowls, nut bowls, cups, utensils and all kinds of household uses. No one has ever had a hint of a problem with its use. Walnut has been used centuries for all kinds of serving dishes and such and that would not be so if there was any problem with using walnut. Walnut has been given a bad rap by well meaning people who rely on myth and poorly researched pseudo science to make people afraid and draw a little publicity for someone.

True there are some rare cases where an allergy to walnut could be trouble. But this is very rare and does not justify avoiding the use of the wood. People who have a confirmed allergy know they have it and it is up to them to stay away from the thing they are allergic to. Heck, there are people with a severe allergic reaction to peanuts, but I am not going to stop eating peanuts because they have an allergy. Use the wood. It is beautiful and easy to work and is utterly safe for most folks.


img

Re: Baby rattle

#11

Re: Another take on walnut

kenny in indep

>very nice, would you mind telling a little about the size, thank you for your time.

Re: Baby rattle

#12

Canola oil

Molly Winton

>I finish my rattles with canola oil. This vegetable oil will not go rancid, and is readily available. Mineral oil is another safe one. These two oils won't polymerize (harden), but I just want the oil to condition the wood and pop the grain. I tend not to use waxes primarily because they will spot when moisture hits it.

Re: Baby rattle

#13

Re: Baby rattle

Leppikallio

>One option is belt AND suspenders: turn that business copy of rattle using some tough and safe wood and leave it unfinished (just sand enough so that jr won't get splinters in his/her tongue). And then make the heirloom copy of the rattle which you can make as beautiful as you like. You should also sign this one and perhaps put a secret paper/message in drilled hole into this rattle so that it will be real heirloom treasure. This is basically the caveman way to do it which I used. Except that I haven't made that heirloom copy yet ;-) However jr will decorate and finish that business copy of rattle for you anyway and if you hide it soon enough when he or she isn't using it anymore or starts using it as a "hit-dad-to-head" toy you will have nice keepsake.

Re: Baby rattle

#14

Re: Baby rattle

Glenn Hodges, Nashville, GA

>I turned my grandchildren rattles from wild black cherry, no finish, no problem. When they finished with them the rattles were saved, dated with the child's birthday and name, and a loop screw was put in one end to make a Christmas ornament. Each year we see it on the Christmas tree.

Re: Baby rattle

#15

Ric Taylor

Don't Put Beads in the Rattle

Ric Taylor

>Jeff,

Putting beads in the rattle is not a good idea. If the child manages to take the rattle apart, the beads could be eaten. I use regular dried corn (pop corn) in my rattles, with great results. If the child manages to eat the corn, there are no safety concerns.

Ric

Re: Baby rattle

#16

Sure, Kenny,

Don Henthorn

>The rattle is about 6" long. Handle is 2 3/4" to 3" long, 3/4"" at end. 1 3/16" at rattle end, 1/2" at large diameter of the grasping part. The ball on the end of the rattle is 17/16" X 5/8". Bead section is 1/2" diameter and beads are approximately 1/2" wide. Make them to suit the length of the shaft. The rings are 1/4" thickness and can be of equal size or can be different sizes. Just make them so the end rings won't slip over the ends of the shaft. It isn't rocket science. These dimensions only need to be approximated. This size worked out well and I would not make it any larger. Could be smaller but you want it to be tough. I sanded very smooth and used Watco natural wiped carefully after 15 minutes. Allow to dry overnight: repeat the procedure and again allow overnight drying. Rub down with the finest grit you have, wipe off carefully and then wait a couple of weeks before you present it to the recipient. Good luck.