Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Turning Exchange piece, "Eyebowl"

Posts

Turning Exchange piece, "Eyebowl"

#1

Turning Exchange piece, "Eyebowl"

keith zimmerman, Normal IL

>This is my exchange piece, which I have named Eyebowl. It's headed East and will be mailed Tuesday morning. It is made from spalted persimmon. The eye, which is a bit of the bark that stayed on the curve of the rim, reminds me of an Egyptian eye, thus the name.

As many may have noticed from previous work, I really like curved, almost round sides on bowls with the rim rolling to the inside. The diameter of Eyebowl is 6 1/2" and it is 2 3/8" tall, including the base. The walls are a bit under 1/4" thick. The finish is five coats of Waterlox followed by a buffing with tripoli and carnuba wax.

keithz


img

Re: Turning Exchange piece, "Eyebowl"

#2

East to Ohio...Maybe? Good job Keith

Doug Thompson near Cleveland

>

Re: Turning Exchange piece, "Eyebowl"

#3

Re: Turning Exchange piece, "Eyebowl"

George Van

>You are going to make someone very happy! I have never turned Persimmon, it must be hard, does it cut and sand easily?

Re: Turning Exchange piece, "Eyebowl"

#4

Re: Turning Exchange piece, "Eyebowl"

keith zimmerman, Normal, IL

>This is my first experience turning persimmon. I found it to be very easy to turn and finish.

keithz

Re: Turning Exchange piece, "Eyebowl"

#5

Re: Turning Exchange piece, "Eyebowl"

Jeff Taylor - Bloomington, Indiana

>It is mine!! Allright!!!! very nice work Keith! When I saw the initial post, I thought to myself, "I would not mind if THAT were my piece!" and it is !! Thanks a lot! I really like it, and I am sure my wife will be all over it when I get home ...