Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

screw size

Posts

screw size

#1

screw size

Lester Gillett/Independence Mo

>I have the Nova Midi chuck and want to use the wormscrew but need

to know what size hold to drill in the blank for it. I read the

instruction but no where does it say what size. looked on the web

for help so came here to ask.

Lester

Re: screw size

#2

JL

Re: screw size

JL

>I usually try 3/8", depending on the "hardness" of the wood. If it is a fairly "hard" wood, I sometimes go for a 7/16". But that's me.

Re: screw size

#3

I use 5/16

Carole Valentine

>

Re: screw size

#4

7mm core size from website or a tad more

Jim Swank

>

Re: screw size

#5

I use 5/16 also

rj anema

>

Re: screw size

#6

Re: screw size

Mike from Tn.

>I've got a Nova G3 chuck and the instructions say use a 9/32 for for softwoods and a 5/16 for hardwoods. I used 5/16 on some walnut and wished I'd gone a bit smaller, but I should have made a few more passes on the barkwood also. My Nova's 2wks old now and I absolutly love it.

Re: screw size

#7

Re: screw size

Jennifer@Indy.USA

>Lester,

I use a Stronghold chuck so I'm of no help to you, however, it's better to have a tight fit rather than for the blank to come loose and then not be able to secure it back on. I usually rub a stick of beeswax on the threads of the screw so that it's a bit easier to remove after the blank is round.

Jen

Re: screw size

#8

Re: screw size

Lester Gillett/Independence Mo

>Thanks every one. I think i will use a 5/16 in a scrap wood to see if

thats the size and adjust from there. This is a great site to ask

for help as every one will help you out.

Lester

Re: screw size

#9

Re: screw size

Don in Central Illinois

>I have the same chuck and the same problem. I thought I was overlooking where they told us the drill size. Anyway, I just attended the Woodworkers Woodshow in Collinsville, IL on Saturday and one of the demo's used the worm screw and told us he used 5/16" and it worked fine. At least now, I can start using the worm screw.