We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Yesterday, I answered a "Craigslist" ad for a Powermatic 91 lathe. This morning I met with the owner, a stair maker in Oakland, and I purchased the lathe. It has the reeves drive, which works smoothly, a new single phase motor, overall it is in very good condition. The spindle runs true and is quiet. (screwdriver to ear stethescope test) I think I now have a good foundatiion, in this machine, to later add a VFD system. I'll need to sell off my old Atlas and the Jet 1236 I recently got to make space for this beast.
Hmmm,...this is going to call for a new larger scroll chuck and a new adapter for my present small Vimarc chuck. Great,the money drain continues....
>I just saw your craig's list add and thought "that lathe looks familar". Sure enough it's the same one. I'm interested. It's hard to find a good used lathe in Northern Calif.! Long story short, I dodn't have access to email right now, so if you get this message please call me at 530-879-0426.
I am not familar with that model no. But it sound like it is similar to the Powermatic 90. If so, it should be a fine beast. :) Those older lathes with the reeves drives were light years better than some of those made today.
>The ad also stated model 91 and I spent a while looking for one on the internet, prior to viewing the machine. It was locked in my memory bank when I first posted. Yes, the metal id label on the machine states a model 90. I didn't record the info 'cause i was trying to act like I didn't really want the lathe. I did have some trouble explaining some drool that ran out of my mouth.
>Great going, Eddie...that's an excellent platform for a lifetime of turning fun ! The PM 90 is a real workhorse, and if you look around, you'll find a number of ways to adapt it, if your needs should grow. Many people have used riser blocks to increase the swing, built their own steady rests, or modified the motor mounting to act like like a clutch to disengage the belt (see the Del Stubbs video for info).
You might want to know that not every PM 90 was configured the same. Some had different spacing of the spindle bearings, and I believe there were some variations on the outboard spindle size. In other words, as you buy more stuff (Yoo-Hoo!), make sure it will work with your particular version. As far as risers, banjos, tailstocks and all there should be no difference at all.
You probably couldn't buy a better and more adaptible big 'ole hunk-o-iron for turning !
Still an excellent gloat. Reminds me of the Mr. Mom film. When asked if he was wiring the house with 220. He replyed..." 220.. 221.. whatever it takes" :)