Carba-Tec 4SE?
Robert W. Henderson
>Does anybody use the carba-tec 4SE mini lathe that Penn State Industries sells? I'm interested in opinions on the quality and utility of that lathe.
Thanks
Knowledge You Can Build On — Est. 1998
Carba-Tec 4SE?
Robert W. Henderson
>Does anybody use the carba-tec 4SE mini lathe that Penn State Industries sells? I'm interested in opinions on the quality and utility of that lathe.
Thanks
Re: Carba-Tec 4SE?
john lucas
>I have the original Carbo-tec and I love it. It's a really solid lathe. Uses #1 morse tapers and 3/4x 16? (I think) spindle thread.
Re: Carba-Tec 4SE?
nailshooter
>I also have that lathe and have used it for a long time. It has turned a mountain of stuff (more pens than I remember when I was in that phase many years ago), and as long as you don't overload it it will give you years of service.
I think it is primarily a spindle lathe as it doesn't have a lot of power to spare and certainly on its small frame it wouldn't be that stable for bowls. Try not to do anymore rough out of logs than you have to with this one.
Mine runs so smooth I call it my sewing machine. I still use it for Christmas ornaments, seam rippers, jewelry and any other small stuff I want to turn.
Robert
Re: Carba-Tec 4SE?
Bill Luinetti
>I use the predecessor (Model 3..something) that I also got from PSI about seven years ago. I've never had any problems with the lathe.
I use a Stubby 750 for any substantial workpieces, but for pens, ornaments, small lidded boxes, and so on, it is a very nice machine.
Bill Luinetti