Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Help with Freeform bowl

Posts

Help with Freeform bowl

#1

Help with Freeform bowl

Brenda

>I am working on my first freeform burl bowl from a piece of white oak burl. Does anyone have any suggestions how I can clean the natural burl tendrils without sanding them? The texture is too yummy to sand smooth but I used a power sprayer to clean the bark off and there are stains from age and weather plus some spots where the power sprayer knocked off some pieces.

I am also unsure as to the best way to seal/finish the bowl. I want a rich gloss and aren't sure if I should use a Tung oil and some other finish or what?? I'd appreciate any input. Thank you!


img

Re: Help with Freeform bowl

#2

Re: Help with Freeform bowl

joaz

>Is it dry.? If not, this thing is going to come apart on you.

Re: Help with Freeform bowl

#3

Re: Help with Freeform bowl - be kind folks :)

Carol from AZ

>Dawn asked this on another woodworking forum for ladies that I monitor and I assured her she would get lots of friendly help here.

And I am sure she will be forthcoming with answers to your questions so you can give her great advise.

Isn't it great how she started out with a picture?

Welcome, Dawn.

Re: Help with Freeform bowl

#4

Re: Help with Freeform bowl

Brenda

>Dry as a bone - hard as heck too! It's was a burl cap that literally fell off one of our oak trees about 18 months ago..... Here's a picture of the other side of the bowl...


img

Re: Help with Freeform bowl

#5

Re: Help with Freeform bowl - be kind folks :)

Brenda

>You're such a sweetie Carol - thanks!

Re: Help with Freeform bowl

#6

Steven Antonucci

How big is that thing?

steve antonucci

>I think it's a pretty good sized piece, but I can't get a sense of scale. (I'm guessing >20").

If it's worth the effort, I'd suggest picking out what you don't want with dental tools and by hand with small wire brushes. I don't think there's an easy button to press here, but it sure looks like it's going to be worth the effort.

Steve

Re: Help with Freeform bowl

#7

Re: Help with Freeform bowl *LINK*

bowlman

>Assuming you have a lathe capable of handling an out of round piece as large as this is, here is what I would do (and have done 100's of these and they are still such a thrill to make):

1. Use the surface you pictured as the "top"

2. Mount the blank between centers and turn a spigot on the reverse side.

3. Attach to lathe using reverse side with newly formed spigot. I prefer to use a chuck that holds onto a pre-formed spigot ot foot. Don't make the spigot too small. Use the largest jaws you have. If this piece is greater than 12 or 14 inches, I'd recommend a #3 jaws on a Stronghold chuck.

3A. Another option: Given that the burl is dry, if you are careful, you could use the chuck expanding into a recess, rather than contracting on a spigot.

4. Turn as large and as deep a recess as you want without turning through all that beautiful grain and character. You may want to make a bead or other rim detail just outside the edge of the bowl depression. See some of Jennifer Shirley's work for examples, or go to my home page at the url provided .. look under bowls in the index (I think).

5. I would use something like Bush Oil, or perhaps Rocklers Wipe On Polyurethane, or a wipe on poly gel. You want to highlight that grain rather than hide it. Also, don't make the "dish" too big, let some of the edges remain as a frame for the grain you select as the "bowl".

6. Price it accordingly ... start high, work down is better than starting low and finding out later that you shoulda charged more ... assuming you would even consider such a thing.

7. Good luck

8. Have fun!


Dick Gerard's (aka bowlman) Home page

Re: Help with Freeform bowl

#8

Re: How big is that thing?

Brenda

>It is about 10X20. I have used a 4" grinder, chisels and my Dremel to clear the bowl part out leaving the natural burl lip on it - it curls over the top almost all the way around the "bowl". I will post a picture when I'm done - the burl patterns are pretty spetacular!

Re: Help with Freeform bowl

#9

Re: Help with Freeform bowl

Brenda

>Thank you Dick for the suggestions! I visited your webpage and your work is gorgeous!