Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Figured maple bowl

Posts

Figured maple bowl

#1

Figured maple bowl

Pat Taylor

>There's the excitement of turning your first bowl, and then there's the excitement of turning your first good bowl. Well, as far as I'm concerned, this is my first good bowl. (you can jump in here if you disagree!)

It's maple with a nice figure, due to its location beneath the intersection with a large branch. I roughed and soaked it a few days ago, but wanted something to take to the local club's show & tell on Thursday so I microwaved it for a while. I got lots of checking, but was able to turn it away.

I waxed the hell out of this, so much that it took 40 minutes to buff out the globs of unnecessary wax that I accidentally applied. 5.5" x 2.75".


img

Re: Figured maple bowl

#2

An inside view showing most of the figure 

Pat Taylor

>


img

Re: Figured maple bowl

#3

Tough-skin-style critiques requested!

Pat Taylor

>

Re: Figured maple bowl

#4

Re: Figured maple bowl

Cyril Griesbach

>It's very nice, Pat. I like the form, the rim and the foot. Now you know that a little wax goes a long way. DAMHIKT.

Cyril

Re: Figured maple bowl

#5

JL

Re: Figured maple bowl

JL

>Pleasing form. Inviting shape. Maybe a bit thinner?

Re: Figured maple bowl

#6

Steven Antonucci

Foot might be a tad large for the bowl...

steve antonucci

>As a rule of thumb, the foot should be somewhere around 1/3 the width of the rim. It might just be the photo, but it looks like it's maybe 40-50% the width. A smaller foot (or different angle on the picture) would give the bowl more lift visually and make it appear lighter.

I also think you could have turned it thinner, but it's not a requirement. I happen to like thicker bowls, but I would have liked to see the inside without the small checks (or the checks very carefully filled and sanded flush.) Thinner might have made them disappear.

I do wish I had your finishing skills, though. The finishes I've seen on you work make me want to throw away eerything I've ever made...

Steve

Re: Figured maple bowl

#7

Re: Foot might be a tad large for the bowl...

Pat Taylor

>Thanks, I had been accidentally (read: turning away catches!) making my others too thin, so this thickness was a refreshing change. I has a nice weight in the hand. It's about 1/2", but I think your right, ~3/8 may have been a bit better.

Whatever that is in the bottom (dark area near the checks) just turned like rotten mush when I got down to it, so I loaded it with CA and dust and sanded the crap out of it. I was afraid that if I went any deeper I'd lose the bottom. :)

Thanks for the complement on the finish. It's sanded from 60 - 12000, then polished, waxed, and buffed with the Liberon kit.