Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Walnut HF

Posts

Walnut HF

#1

Walnut HF

Jeff Myroup

>I turned this a couple of weeks ago. I am horrible at taking pictures and this is the first photo I have taken with my wife's new camera. I have no idea how to use it. The peice is walnut about 6" deep and 6" round. I have yet to put the final finish or buff yet. It still needs some more drying. The opening is about 1.5 " , and is my second attempt using kelton hollowers. It is about 3/8" thick, put pretty rough inside. Still working out the smoothing cuts LOL. Let me know what you think, be honest it is the only way we learn. Thanks for taking a look.

Jeff


img

Re: Walnut HF

#2

Re: Walnut HF

Gary in Zirconia, NC

>Excellent form and balance. I like the way the grain is so well balanced too. I'd like a little smaller base though.

Re: Walnut HF

#3

Re: Walnut HF

Jeff Myroup

>Gary

I had the same thoughts. I have been working on smaller bases. They always seem smaller on the lathe, and when I part them they seem so much bigger. I have yet to figure that one out LOL. Thanks for the comments

Jeff

Re: Walnut HF

#4

Re: Walnut HF

Jennifer@Indy.USA

>Oh, wow, this is really nice Jeff! Walnut is one of my favorites and you've done a superb job. Lovely form and really neat grain orientation. Beautiful!

Jen

Re: Walnut HF

#5

Re: Walnut HF

Ruth Niles

>Jeff, this is very beautiful and your photography is just fine for me.

I have the same problem with judging the size of the base when it's on the lathe. Sometimes I will take measurements to get it 1/3 of the fattest diameter but, on the lathe, that really looks too small and out of proportion yet it looks perfect when standing on it's own.

Great work. Makes me want to turn Black Walnut again. I had so much of it, I was just burning it........... sorry, Jen!

Re: Walnut HF

#6

Re: Walnut HF

Jennifer@Indy.USA

>Ruth, no worries. It's been so cold here the past 4-5 days that you'd just cringe to know what I've been burning in my wood stove! Some of which is walnut, ash, cherry, maple. Gulp.

:)

Re: Walnut HF

#7

Re: Walnut HF

Mac

>Nice job. I think the base is fine for the size of the vessel. Sometimes when you actually go to the bother of re-turning them, you wish you hadn't.Then it becomes a job of turning the large diameter down to match and you have a totally different vessel.Next time try taking a pic of it on the lathe,then flip it vertical on the computer and see how it looks before you finish the foot.

Re: Walnut HF

#8

Great idea, Mac ! For a lot of forms, too.

Ruth Niles

>

Re: Walnut HF

#9

Re: Walnut HF

Jeff Myroup

>The size of the base is actually 2". I think it looks bigger in the picture due to the camera angle. Your comment about the 1/3 rule prompted me to measure. So it falls within that guide line. is there a guide line pertaining to base size vs opening size? because that might make it look bigger as well

Re: Walnut HF

#10

Re: Walnut HF

Jim Shaver Oakville, Ont.

>Great Idea Mac.

I might even try that with some of my pens..

:-)

Take care,

Jim

Re: Walnut HF

#11

Re: Walnut HF

Jeff Myroup

>I never thought of that. I will have to give it a try. Thanks

Jeff

Re: Walnut HF

#12

Re: Walnut HF

Carole Valentine

>Picture is a good idea, but I am lazy so I just take the whole thing off the lathe, chuck and all, sit it on a shelf at eye level with a piece of card board propped in front to cover everything right up to the base so I can see if it looks right.

The form on this piece is wonderful Jeff. Actually I think the base looks fine on this piece. You don't always have to go for a tiny little base as long as the curves coming into it are good, which these are. The grain orientation is great too. Keep practicing with the Keltons...you will get the hang of using them and will be able to tell by feel and sound when you are "there".

Re: Walnut HF

#13

Re: Walnut HF

Ron in Drums PA

>I too like the base on this one.

I'm with Carole, I just take the chuck off the lathe and hold it up when I want a better look.

Your picture is fine, next time move the camera a little higher up so top lip looks like an oval in the viewfinder of your camera.

Re: Walnut HF

#14

Re: Walnut HF

Allen Neighbors

>I like this one a lot; beautiful form, truly nice curve going to the opening. Grain's perfect.

Keep at it... with more practice, like Carole said, it'll come, and those insides will begin to smooth out.

Ya done good, Jeff, how long have you been turning? (I may need to give it up.) :o)

Re: Walnut HF

#15

Re: Walnut HF

Jeff Myroup

>Allen

Thanks for the comments. I have been turning (more off than on) for the last 4 years. I have found this board to be a source of great inspiration.

jeff

Re: Walnut HF

#16

Re: I don't feel so bad, then...

Allen Neighbors

>and you're right about this board. I've sure learned a lot from WCers!

Re: Walnut HF

#17

Re: Walnut HF

Mike Rubes, Apex, NC

>Hi Jeff,

Great form! I think you really nailed this one nicely. I really like the way the grain ended up as well. Really well done.

Thanks for the pic,

Mike

Re: Walnut HF

#18

Jeff, that's....

Joe in a Cleveland suburb

>really nice. Did you turn that as a wet piece of walnut?

Thanks,

Joe

Re: Walnut HF

#19

Re: Jeff, that's....

Jeff Myroup

>Joe,

It was turned green in one session. It still has a way to go until it is dry. So far no cracks, or serious warping.

Jeff

Re: Walnut HF

#20

Re: Jeff, that's a good looking form, but....

Jamie Donaldson

>.. the photo has distorted it due to optical barrel distortion, caused by placing the camera too close to the work and using a wide angle focal length. Back the camera away from the turning several feet, then fill the frame by zooming in with a telephoto focal length. That will show more correct perspective, and better represent the actual profile- reduces the "fat lady" effect as we used to say in the photo business.

Re: Walnut HF

#21

Re: Jeff, that's a good looking form, but....

Jeff Myroup

>Thanks for the info. I will try that later today. I had to get really close because I could not find the digital zoom, I had to manually zoom the lens. Still have a lot to learn. I am going to play with the camera today. It is way to cold to be in the shop. I just cant mess with the settings or my wife will kill me if I screw it up LOL

Re: Walnut HF

#22

Re: Alway use optical zoom,never digital.

Jamie Donaldson

>