Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

New to boards

Posts

New to boards

#1

New to boards

Jeff Myroup

>I just wanted to introduce myself, being a new member and all. My name is Jeff Myroup, and I live in Hammond Indiana. I stated turning about 4 years ago, on an old shop smith that my father gave me. I had no idea what I was doing, but have gotten better over the past few years. This christmas my wife bought me a 2hp jet 1642 evs. 3 years ago, I gave up skydiving and jumped into turning as my main hobby. I am completely self taught, but hope to take some classes in the near future. I am looking into clubs in the area but most are to far away, due to work and being on call. I look forward to getting to know you all in the future. There is a lot of talent on this board, which I hope to learn from. Thank you for your time and allowing me to introduce myself.

Jeff

Re: New to boards

#2

Re: Welcome to the addiction, Jeff.

Allen Neighbors

>I agree with you... the talent that is on this forum is phenomenal! The fact that they all share it is what furthers the craft and art of Wood Turning.

I'll advise you to get some hands-on, if it's at all possible. It's been truly hard for me to get rid of the bad habits I picked up trying to learn on my own... and that was only 2 years of it. You've been at it for four. Stay safe, get some lung protection, have fun. :o)

Re: New to boards

#3

Dick Hines

Re: Welcome to the addiction, Jeff.

Dick Hines

>Welcome Jeff. Cherk out the chat room on Wed nights.

Re: New to boards

#4

Steve Kubien

Welcome Jeff

Steve Kubien

>Nice to meet you. Pull up a chair. There's fresh coffee in the pot. Enjoy your stay.

Steve Kubien

Ajax, Ontario

-who is thinking that skydiving is a source of fewer injuries than turning, just more fatal ones.

Re: New to boards

#5

Re: Welcome Jeff

Jeff Myroup

>Thanks for the welcome. Steve is Ajax near Atikoken? My wife's family lives there. I imported her 5 years ago. We go up to thunderbay a couple of times a year

Re: New to boards

#6

Re: Where is Hammond?

Jamie Donaldson

>

Re: New to boards

#7

Re: Where is Hammond?

Jeff Myroup

>Hammond is in the NW corner of the state, near the lake. I am about 20 miles from Chicago. Needless to say GO BEARS!!!!

Re: New to boards

#8

Re: Too bad-wrong direction for joining...

Jamie Donaldson

>... our AAW chapter in Lu-a-vull,KY!

Re: New to boards

#9

Re: Where is Hammond?

Bill Youngblood

>Hey Jeff,

Welcome aboard. There are several clubs in the Chicago area. Go to www.woodturner.org (AAW) and click on local chapters. That will guide you to the state of IL and all their clubs. I also highly reccommend joining AAW. Good luck.

Bill

Re: New to boards

#10

Re: New to boards

bowlman

>Welcome Jeff ... always nice to hear from a fellow addict. Have you joined the American Association of Woodturners yet? You really should, there is a great amount of info there as well. I am in Indy and am the founder. If you have questions, you can get answeres here ... usually within a few hours or sooner ... some turner never sleep ... they just go from shop to PC to shop to PC ... you get the picture.

bowlman

Re: New to boards

#11

Re: New to boards

Carole Valentine

>Welcome, Jeff! Looking forward to more posts and some photos of your work. Skydiving? I wanted to do that so badly when I was in my 20s but I took flying lessons instead. Then when I got older, I started thinking about that old saying "Why would anyone jump out of a perfectly good airplane?" I decided that they probably had a good point. ;)

Re: New to boards

#12

Steve Kubien

Re: Welcome Jeff

Steve Kubien

>Never heard of Atikoken. Ajax is about 20 minutes east of Toronto. Thunderbay is, what, 2 hours by plane? Too darn far to drive that's for sure.

Cheers,

Steve Kubien

Ajax, Ontario

Re: New to boards

#13

Peter Charles Fagg (UK)

Re: New to boards

Peter Charles Fagg (UK)

>Welcome from all the turners over the pond!

Peter.

Re: New to boards

#14

Re: New to boards

Jeff Myroup

>Ok first let me clear up a common misconception: There is no such thing as a perfectly good airplane ;) I had a great time skydiving. I started at 33, I had to stop because the DZ I went to shut down. My wife always wanted to learn to fly. She settled to dogs instead. She is really into Mastiffs. We have two at the moment. We rescued a female, and bought a male last year so she has her hands full trying to show him. She feels about them like I feel about turning. I will be posting some photos early next week. The weather here is way to cold to be in the shop so I guess I will have to figure out my wifes new camera.

Jeff

Re: New to boards

#15

Re: New to boards

Jeff Myroup

>I joined the AAW a couple of years ago. Indy is only a couple of hours away, might have to schedule a trip. That is if I am still invited after sunday lol.

Jeff

Re: New to boards

#16

Fellow Hoosier

Jennifer@Indy.USA

>Jeff,

Welcome to WoodCentral! You've found the best place on the web to learn about anything woodworking related. From one Hoosier to another I say welcome...and I'm sorry that you live so close to Chicago. Good thing you live in Indiana though because that will make it much easier to deal with when your team comes in second on Sunday. I'm sure there will be lots places selling Colts gear up there in Hammond :)

GO COLTS!!!!

Re: New to boards

#17

Welcome

Mike Cunningham (Cape May NJ)

>A wonderful addiction and I'd guess, a bit safer than jumping out of airplanes.

Mike

Re: New to boards

#18

Re: Fellow Hoosier

Jeff Myroup

>Thanks for the welcome, but I lived in Illinois most of my life, with the exception of when I was in the Navy. Believe it or not but most of Hammond are BEARS fans. I have been a Bears fan most of my life. Although I sadly admit they are going to have there work cut out for them this sunday. I think it is great that both the Bears and Colts are in the game. Btw I have seen some of your work and I really like your texturing and burning. It is something I am working on (nothing to show yet mainly some carving, not burning yet). I am also experimenting with guilding and patinas. I have been around the AAW boards a little bit but they don't seem as active as this board.

Jeff

Re: New to boards

#19

Re: Welcome Jeff

Jeff Myroup

>Apparently nobody knows where Atikoken is :) My Wife and I are going to be coming up to Milton in a few weeks to visit my father in law

Re: New to boards

#20

Re: Fellow Hoosier

Jennifer@Indy.USA

>Thanks Jeff...that's very kind of you.

I'll try to be nice Sunday night after the game.

Jen :)

Re: New to boards

#21

Re: New to boards

Ron in Drums PA

>My claim to fame:

Don Kellner, who holds the Guinness World record with over 35,000 jumps doesn't live to far from me. I've watched him land from one jump, run to another plane while putting on another parachute, then jump out of that plane when it was high enough. He would repeat this all day long.

You won't get me jumping out of a plane!

Welcome to WC

Re: New to boards

#22

Leo Van Der Loo

I certainly know where Atikokan is, my oldest

Leo Van Der Loo

>son and his family lives there, his wife is a family doctor there, I will be there 10 days from now, weather permitting, pristine wilderness all around, a little cool this time of year.

Have fun and take care

Leo Van Der Loo

Re: New to boards

#23

Real Bear Fan

Jeff Myroup

>This is my boy Angus. He is a little over a year old. He is 34" and 190lbs wearing my XL bears jersey. Feel free to print this and put it on your desk LOL

Jeff


img

Re: New to boards

#24

Leo Van Der Loo

Oh and yes welcome aboard of course.

Leo Van Der Loo

>

Re: New to boards

#25

Re: I certainly know where Atikokan is, my oldest

Jeff Myroup

>That is really cool. My mother in law was a janitor at the High school and just retired last year. My step daughters grand parents live there as well. I have only been there once last year, in the middle of winter. It was really nice country. I will have to ask my wife if she knows the people you are talking about