Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Opinions about P&N tools

Posts

Opinions about P&N tools

#1

Opinions about P&N tools

John Clifford in Chicago (Go Bears!)

>This may have been asked before but I can't find it using the search function. I'm interested in P&N tools, are there any here with experience using them that would care to share their opinion?

Thanks in advance, John.

Re: Opinions about P&N tools

#2

Re: Opinions about P&N tools *LINK*

Raymond Overman in SC

>I've got four of them. I like them. I would buy them again.

The link goes to what others had to say:


Articles Section

Re: Opinions about P&N tools

#3

Re: Opinions about P&N tools

John Clifford in Chicago (Go Bears!)

>Thanks, I didn't think to check the articles section.

John.

Re: Opinions about P&N tools

#4

Steve Kubien

Re: Opinions about P&N tools

Steve Kubien

>Hey John,

I've got a P&N bowl gouge and their 1"+ skew chisel (Christmas gifts, beep, beep). I love them and as money allows, all of my tools will be P&N's

Cheers,

Steve Kubien

Re: Opinions about P&N tools

#5

Re: Opinions about P&N tools

Bill Neddow

>P&N tools are excelllent value for money. Plus, they have some unusual shapes that I have found are very effectinve. Look at their detail gouges. There is lots of "meat" in the bottom of the shallow flute to keep them from vibrating (almost every catch is preceded by vibration). Also, their roughing gouge should be a prototype for the whole industry on how this tool is made. No tiny, weak tine here. It is a massive piece of steel that is not going to break at the tine and endanger the wood turner!

Re: Opinions about P&N tools

#6

Re: Opinions about P&N tools

John Clifford in Chicago (Go Bears!)

>I was pretty sure I was going to buy some of their tools, now I'm convinced. Any suggestions on where to buy? It seems prices and selection vary a bit from the three places I've seen them for sale, Lee Valley, Packard, and Craft Supplies.

John.

Re: Opinions about P&N tools

#7

Re: Opinions about P&N tools

Mike Cunningham (Cape May NJ)

>Hi John,

I have 4 P&N tools and love them. They're available from Craft Supply and Lee Valley. Lee Valley are a bit less expensive but CS has superb and I mean superb customer service.

Mike

Re: Opinions about P&N tools

#8

Re: Opinions about P&N tools

Greg Jensen

>Some P&N tools for sale on ebay.

Re: Opinions about P&N tools

#9

Re: Opinions about P&N tools

Bob Fawcett

>I have several of the P & N tools. 2 are spindle gouges and they are my goto tools for spindles.

You can't go wrong with any of the suppliers you list. I have bought many things from Lee Valley and they are great. I bought at least one of the P & Ns from Packard. They are closer to me and regular shipping usually gets to me sooner.

Re: Opinions about P&N tools

#10

Re: Opinions about P&N tools

Rick Pixley

>I bought mine from Benatree in Australia..Don't remember the url but at the time they were the only ones that had them. I couldn't find a local source..Rick