We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Here you go Carole. Pardon the clunky block underneath it. I bought this little table top tri-pod for the camera thinking it might make things easier, but now it sits too low for profile shots in the photo box. So up on the block it went.
>.. there's no substitute for a real stud camera support as you know from your TV studio experience. A very servicable tripod with center leg bracing costs less than $100 but is certainly worth the 1 time investment. I do like a ball head to replace the stock head, but a good one starts at about $50 and goes up rapidly to over $300, but that's overkill for your purposes,right? ;-(((
>....Jamie, I soon found out that my $7.00 investment was a waste of $$ when I realized that the mount on the bottom of the camera is on the far left side and the tripod won't stand on it's own three legs without me holding it! Gawd!
I have a larger tri pod that I'll have to revert back to I guess.
>Jen, That's a very nice bowl, even if you did have to hold the tripod by hand. The stippled texture around the rim really works for me, but repeating it at the foot makes it even better, as the two relate to each other so strongly. I can also see some nice little details, like the slightly crowned shape to the textured band around the rim -- excellent result !
SO, should you stay away from the shop for a month again, or get back in there ? I vote for the latter !
>Jennifer just make a big beanbag and use a cable release or the self timer on the camera. That's works better than a table top tripod unless you need to carry it somewhere. I own a Leitz table top tripod which is great but was rediculously expensive.