Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

"Cutting it Close"

Posts

"Cutting it Close"

#1

"Cutting it Close"

Jennifer@Indy.USA

>Why do I do this? It never fails that I always manage to cut these dudes so close that it's a nail biter when it comes time to part them off. Guess I just don't want to waste any good wood?

Gulp.

This is not recommended. You really should leave yourself a tad more room to work! A finished pic coming soon....I hope :)

Jen


img

Re: "Cutting it Close"

#2

Brad Vietje

Been There -- Done That

Brad Vietje

>I somehow seem to do this pretty often ! I could'a taken that pic at least a hundred times...

Maybe I ought to just take a little more time and prepare the blank for a glue block, but I usually don't have a lot of spare time to turn, so I never seem to learn. I have learned the hard way about hitting those little spinning black thingies with the parting tool, too ! I usually reverse these smaller pieces and turn the foot away between centers, but still, this can be an exciting way to live.

Nice little HF by the way -- I look forward to the finished pic.

Safe spinning,

Brad Vietje

Newbury, VT

Re: "Cutting it Close"

#3

Re: "Cutting it Close"

Carole Valentine

>Hehe! I tend to do the same thing Jen. But when they get that close, I reverse them on a cone with a piece of leather or rubber then bring up the TS. I can't seem to get in there to tuck the bottom right when they are THAT tight.

Re: "Cutting it Close"

#4

Not much of a Jamb Chuck left - :)

Jake Niedling

>

Re: "Cutting it Close"

#5

Re: "Cutting it Close"

Bill Youngblood

>Hi Jen,

Save your Christmas and Birthday money and get a vacuum chuck. You'll wonder how you got along without it. If you look around they are available for a lot less than what the tool houses ask. My pump came from e-bay and I made the chucks from PVC couplings from Lowe's. Just a suggestion.

Nice piece anyway. Hope to see it finished.

Bill

Re: "Cutting it Close"

#6

Bill is right on. How did I get along without it?

Norm Smith in Nova Scotia

>

Re: "Cutting it Close"

#7

Re: "Cutting it Close"

Jennifer@Indy.USA

>Yea, I know Bill. I'd love to have one but have just never gotten around to buying the pump and putting all the stuff together. It wouldn't have helped a whole lot on this one though, since there's a see through bark inclusion on one side :)

Jen

Re: "Cutting it Close"

#8

I do the same thing-cuss myself everytime

john lucas

>

Re: "Cutting it Close"

#9

Mike Stafford

Re: "Cutting it Close"

Mike Stafford

>I invariably do the same thing on some of my boxes with globular forms. I guess my design is at fault but more than likely I should measure twice and cut once. I almost never have enough left to completely shape the bottom of the box. At least you didn't turn it into a funnel....

Re: "Cutting it Close"

#10

Dozuki saw

Jorge Castaneda

>Hi Jen,

Nice little piece, for that kind of situation i score with a skew or detail gauge and then cut with a dozuki saw, (a ryoba foe larger stuff), the parting tools are great for shaping things and making beads, alas, I do not like them for parting so I use the dozuki, then reverse mounting and a light clean up.

Jorge

Re: "Cutting it Close"

#11

yea, but....

Jennifer@Indy.USA

>But, Jorge...that takes all the "excitement" out of it :)

Jen

Re: "Cutting it Close"

#12

Rats!!

Jorge Castaneda

>I did not think of that... : )

Re: "Cutting it Close"

#13

Re: But so does turning it into a funnel!!!..

Jamie Donaldson

>

Re: "Cutting it Close"

#14

Leo Van Der Loo

Living close to the edge, But I don't see the same

Leo Van Der Loo

>marks on your chuck as on mine, maybe I was TOO close at one time AND another ;-))).

Seems the pointy ends are always longer than first envisioned, Yes been there and done that too, also seen the end result of your little BULB, and I do like it, nice job.

Have fun and take care

Leo Van Der Loo