Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Shop Layout Revisited

Posts

Shop Layout Revisited

#1

Shop Layout Revisited

tm

>Can anyone share information or resources on laying out a shop

efficiently from a space and function perspective? I'm in a one car garage, have a couple of bench mounted lathes, tablesaw, drill press, bandsaw, etc. Except for the lathes everything is mobile.

My handtools are in upright rollaway boxes.

I do all my work from a wheelchair, and I spend a fair amount of time moving machines from one place to another to access a tool or material.

This is an ideal time for me to work out a better floorplan because

I'm insulating & drywalling 3 out of 4 walls ( 4th wall is already framed & plastered ) Fiberglass & drywall will also cover the inside of the roof.

I'm thinking about a dust collector, enclosed to keep the noise down,

better lighting, more electrical outlets, storage in the form of

both shelving & drawers and some more benchtop areas.

I consider myself to be pretty new at all of this and I'm sure there must be stuff I'm missing.

What works for you?

What doesn't?

In Feb. my local woodworking society is sponsoring a shop

tour at the local California Vets Home. According to the flyer

the average user is 75 years old and the facility is ADA compliant.

I hope to learn a great deal there that I will be able to apply

to my own shop but my project is starting now so I'm starting to look

for ideas now and especially ideas from fellow turners.

Thank you in advance for all replies.

John

Re: Shop Layout Revisited

#2

Re: Shop Layout Revisited

Ruth Niles

>John, when I was trying to plan out my shop, I went to the shop pictures here on WC. On the left bar go to "Shop Tours" down under ODDS 'n' ENDS. You have to click on each name but there are some terrific ideas and you can actually see the layout. There are a number of shops in garages like yours.

Good luck

Re: Shop Layout Revisited

#3

Re: Shop Layout Revisited

Bill Hale / Woodspinner

>tm

Considering your space, I would find an old kids playhouse to set outside your shop. Wire it and use X-10 switches to control your dust collector and your compressor. I set mine close to the shop and used 4" black sewer pipe for vacuum lines to locations in the shop. Run the Vac. and air through the shop wall to locations you want inside the shop.

Quiet

Remember to run a drain line from the bottom of the compressor to an outside drain with an outside valve.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Shop Layout Revisited

#4

Re: Shop Layout Revisited

tm

>Great idea for saving space Bill.

Also, omitting the drain line & valve is the kind of mistake

a rookie like me would make.

Thanks,

John

Re: Shop Layout Revisited

#5

Re: Shop Layout Revisited

tm

>Thanks Ruth, I did browse the shop shots.

Thats when I realized I should put it to this forum and

tap into the experience of the group.

I've posted at a few other sites and I'm getting ideas

I hadn't considered. Very informative,

John