Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Cutting pen blanks safely......

Posts

Cutting pen blanks safely......

#1

Cutting pen blanks safely......

Alan Tolchinsky

>on a 10" miter saw. I was thinking of building a wood "L" shape fence to prevent kick back. I need ideas on how to hold the blanks safely. Oh, this is the only saw I have in my shop right now. Any ideas on cutting blanks on a CMS appreciated.

Re: Cutting pen blanks safely......

#2

Re: Cutting pen blanks safely...... *LINK*

Ron in Drums PA

>One of these articles has a pen sled for a miter saw, I don't remember which one.


IAP

Re: Cutting pen blanks safely......

#3

Re: Cutting pen blanks safely...... *LINK*

Jim Shaver Oakville, Ont.

>Hi Alan,

Well just the thought of doing that on a CMS scares me. here is a self serving link to an article I wrote...in particular the sled i use on the band saw, it's so much safer!

:-)

This is what I teach.

take care,

Jim


Pen Making

Re: Cutting pen blanks safely......

#4

Re: Cutting pen blanks safely......

Bill Turpin in WNC mountains

>I have used a chop saw for pen blanks for three years. Use DeStaco toggle clamps to hold both sides of blank. Turn off saw and allow to coast to stop before reising blabe. Use a stop block for consistant lengths.

Bill in WNC mountains

Re: Cutting pen blanks safely......

#5

Re: Cutting pen blanks safely......

Alan Tolchinsky

>Thanks Jim, I love that tutorial; I've saved a copy. But I don't have a BS here, only a CMS. Yes it is scary to use for small pieces and that's why I'm getting ideas here. Thanks again. Alan

Re: Cutting pen blanks safely......

#6

Re: Cutting pen blanks safely......

Alan Tolchinsky

>Thanks Bill, That idea sounds like a winner. And it keeps those fingers where they belong: on my hand. :) Alan

Re: Cutting pen blanks safely......

#7

Re: Cutting pen blanks safely......

Bill Youngblood

>Hi Alan,

Check with Mike from St. Clair Shores. We were talking last night about cutting small pieces on a chop saw and he said he has a jig for just that. Maybe he can get you a picture. Tell him I sent you.

Bill Youngblood

Re: Cutting pen blanks safely......

#8

Re: Cutting pen blanks safely...... *LINK*

Russ Babbitt

>Check link...


Wood Magazine

Re: Cutting pen blanks safely......

#9

Re: Cutting pen blanks safely......

Alan Tolchinsky

>Thanks Russ, I was thinking of that article. I knew I saw it somewhere but couldn't remember where or the particulars.

Re: Cutting pen blanks safely......

#10

Suggestions...

Peter Teubel

>I would take that jig one step further. Screw a 3" tall by 24" wide piece of plywood to the fence and cut thru it. There's your zero-clearence slot. 100% backside support for the cut piece.

Re: Cutting pen blanks safely......

#11

Re: Cutting pen blanks safely......

David Barr

>I cut my pen blanks with a inexpensive miter box and saw (sold at any Home Depot, Lowes or any other hardware store). The miter box can be plastic or metal and comes with s fine toothed saw. Total price is usually around $10 - $15.

Good luck!