Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Mesquite Box-First Pic-

Posts

Mesquite Box-First Pic-

#1

Mesquite Box-First Pic-

Ron McKinley

>This is my first picture post. Critiques welcomed and encouraged. The proportions started out with the Golden Mean but had a little trouble getting a tight fitting lid so the base "shrunk" about 1/4" when I had to recut the spigot for the lid�twice! Richard Raffan and Chris Stott have nothing to worry about for a while, probably quite a while! LOL Got the cabachon at a local gem and mineral show and don't know what type rock it is. I glued it in with epoxy since mesquite is so stable. ......Ron


img

Re: Mesquite Box-First Pic-

#2

Keith Tompkins

Re: Mesquite Box-First Pic-

keith tompkins

>Welcome aboard, Ron! Looks good, nice match on the grain as well. If I had any suggestions, the bead around the top appears a little off-balance, however, it's just fine as is! Hope to see more...

Re: Mesquite Box-First Pic-

#3

Re: Mesquite Box-First Pic-

Allen Neighbors

>Well done box. Looks good with that color cabachon on the lid. You did match the grain alright, too, even after recutting twice. :o)

Re: Mesquite Box-First Pic-

#4

Cool Box!!

gil jones

>Nice box, Ron.

Whatever the cabochon mineral is goes well with the Mesquite.

Gil

Re: Mesquite Box-First Pic-

#5

Re: Mesquite Box-First Pic-

Ron in Drums PA

>Believe me, I've done the same thing trying to get a good fit on a lid.

Great Box, what did you use for a finish?

Re: Mesquite Box-First Pic-

#6

Re: Mesquite Box-First Pic-

Ron McKinley

>The finish is Watco Natural buffed out with the Beall system. I lucked out in getting the grain to match because the grain was "swirly", (if that's a word) and the quarter inch I lost in fitting the lid didn't really detract that much...Ron

Re: Mesquite Box-First Pic-

#7

Re: Cool Box!!

Ron McKinley

>Thanks Gil. This is honey mesquite from a friend in Texas which is a lot easier to turn than the screwbean mesquite......Ron

Re: Mesquite Box-First Pic-

#8

Re: Screwbean mesquite? How simliar ...

Jamie Donaldson

>... are the 2 in appearance?

Re: Mesquite Box-First Pic-

#9

Re: Mesquite Box-First Pic-

C.W.Stivison

>Good job. I like the gem it the top. If we just could find someone in Texas who had wood like that.

CW

Re: Mesquite Box-First Pic-

#10

Picture of screwbean mesquite

Ron McKinley

>This is screwbean mesquite�one of the most beautiful woods in North America in my view. Normally I would fill the twig hole with something but it never looks natural so thought I would just leave it as is. It's always amazing to turn a piece of it and see a little green twig inside, still growing, even though the tree has been dead for almost three years. ........Ron


img

Re: Mesquite Box-First Pic-

#11

Suggestion

Ed Moore

>Ron,

When securing the cabachon use a silicone adhesive which is more forgiving of wood movement than epoxy. I also would not go for a tight fit and would leave just a little wiggle room as the wood will shrink a little and the cabachon won't.

Ed

Re: Mesquite Box-First Pic-

#12

Re: Mesquite Suppliers

Ron McKinley

>Just click on Woodfinder.com right here on WC and put in "mesquite" and you'll find several sources. What I like about mesquite is it's so stable. You can turn an endgrain bowl/box and leave the pith in and it just doesn't move or crack......Ron

Re: Mesquite Box-First Pic-

#13

Re: Suggestion

Ron McKinley

>Thanks Ed. Most "rockhounds" suggest a flexible glue such as E6000 or RTV for gluing rocks/gems to wood because of wood movement but mesquite is so stable it just doesn't move after it's dry so I took a chance and used epoxy. .......Ron

Re: Mesquite Box-First Pic-

#14

Re: Mesquite Box-First Pic-

Mike Nelson

>I think CW was saying that 'toung in cheek'. That or he hasn't looked out his back door lately, if he lives in Texas. ;)

Re: Mesquite Box-First Pic-

#15

Mike Stafford

Re: Mesquite Box-First Pic-

Mike Stafford

>Nice job, Ron. I too, think a slightly reduced bead around the cabachon would be better. The stone needs a small frame and not much else. Very nice first box! I wish my first had looked as good.