Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

I'm a lurker!

Posts

I'm a lurker!

#1

I'm a lurker!

Joe in a Cleveland suburb

>Yes. I'm a lurker. There. I feel better. I said it.

I spend all my time (too much time) over on the regular Messages board. I have since Badger Pond went away. I also spend time on the Hand Tools board, but mostly the regular Messages board. Also, I proudly wear my WoodCentral hat everyday and sometimes my WC jacket. Lastly, I've even visited the Holy Land. Yes, I have visited our leaders HQ; Ellis' shop. Yes, I know pretty cool, ok ok get up. You don't need to bow to me... :)

Just kidding. Seriously though, I do lurk here a lot mostly because I really enjoy looking at the work you people do. Some of the bowls and hollow vessels are amazing. I really enjoy the pictures. Someday, when I've done the flat work stuff I want to accomplish, I want to spend more time with my little lathe. So for those reason I lurk - viewing what you've done and gaining knowledge. Until then, I really don't have much to offer.

WoodCentral is my daily woodworking magazine. I get it everyday instead of once a month or every other month. There seems to always be something different here each day too. Unlike the ww'ing mags that seem to be the same stuff month after month any more. By the way, I lurk with Fine Woodworking too. I never write to them or post on their forum.

The main reason of this post is to say thanks to you people who take the time to provide great information and to those who post those great pictures. Please don't stop! I've been wanting to say that since even before the "Lurker" posts.

Thanks.

Joe

Whew. I don't feel so guilty here now...

Re: I'm a lurker!

#2

Joe Lurking is not a bad word or bad thing

Norm Smith in Nova Scotia

>

Re: I'm a lurker!

#3

Re: I'm a lurker!

Carole Valentine

>Thanks for the smile, Joe! Be sure you have done everything you want to do on the flat side, before you start turning. Chances are you won't want to leave the round world very often once you start. :) I wish I had made a bunch of cabinets and stuff for my shop before I got my first lathe - now I just keep saying "someday..." Still trying to figure out how to turn a shop cabinet on the lathe.

Re: I'm a lurker!

#4

Re: I'm a lurker!

Bob Fawcett

>Carol,

If you figure that "turn a shop cabinet" thing, please post. I am sure I would make a lot more of them if I could turn them.

Re: I'm a lurker!

#5

Leo Van Der Loo

Still trying to figure out how to turn a shop

Leo Van Der Loo

>cabinet on the lathe, good I didn't have my mouth full with coffee, (it got cold reading all those posts).

But Carole all you have to do is turn one of those real big lidded flat bottom bowls, 4 turned dowels for legs put on the one side and a hinge on the lid couple of boards in there and you're all set, ;-))).

But yes I know what you're talking about, my flat wood artistry does not go far beyond hammering some 2x4'S together, so all my cabinets are scrounged together metal ones, but they do, no splinters on those, trying to catch up rouging al this wood that I keep bringing home, seems hopeless ;->>.

Have fun and take care

Leo Van Der Loo

Re: I'm a lurker!

#6

Re: I'm a lurker!

Doug Thompson near Cleveland

>Welcome to the dark side of the site. I agree with Carole. Many of us started flat and had no interest in a lathe unless it HAD to be used to finish a project. For 25 years I used a scraper and sandpaper to get by. Then I bought a 3520 for one project, it sat unused for three months... what a huge mistake. UNTIL I cut my first green wood... holy smokes, it's a feeling you can't discribe.

Now, the table saw is a work bench. Shavings litter the floor, rafters and everything in between. The yard is a wood pile. The sound of a chainsaw sends a chill up your spine. A city dump (free fire wood and wood chips) is a nice place to spend a hour.

Enough said, LoL

Re: I'm a lurker!

#7

Re: Yes it's addictive- my tablesaw...

Jamie Donaldson

>...planer, and joiner have been under a tarp on the other side of the shop/garage for about15 yrs. Can't even get them out unless the wife's car is moved outside, but I can't bring myself to get rid of the either.

Re: I'm a lurker!

#8

Re: Yes it's addictive- my tablesaw...

Carole Valentine

>Jamie, I am in the same fix. I have a beautiful Unisaw (one of the last ones made in US) and a brand new PM long bed jointer, a planer and a bunch of other stuff that are just collecting dust. Should sell them to pay for insulating, but just can't bring myself to do it.

Re: I'm a lurker!

#9

Mine Are Too

Barbara Gill, Remlik VA

>I have a 5HP Rockwell Delta Unisaw. It makes a great place to put wood, BUT NEVER wet wood. :-)

Re: I'm a lurker!

#10

Re: Still trying to figure out how to turn a shop

Carole Valentine

>Leo, I have thought how cool it would be to have a couple of 4' bowls fitted with shelves and doors hanging on the shop wall as cabinets. Afraid my little Nova couldn't quite handle that though! :)

Re: I'm a lurker!

#11

Re: Yes it's addictive- my tablesaw...

Bob Fawcett

>Sounds to me like you all need to try a segmented turning. Those table saws, jointers, and planers can be useful for something.

Actually, I agree with all your posts. I bought my lathe to turn some bedposts. Since I turned the posts, the rest of the bed parts and some uncut lumber sit waiting for me to finish the bed.

Re: I'm a lurker!

#12

Re: Yes it's addictive- my tablesaw...

Rick Bane

>That's funny! I thought I would get a lathe to do some small stuff every now and then--but no I had to get hooked on this round stuff!!! I even joined a club! My poor jointer/planer/table saw never saw it coming. Actually I bought a lathe last because I thought this might happen.

Rick Bane

Re: I'm a lurker!

#13

Stop! You people are scaring me! :)

Joe in a Cleveland suburb

>

Re: I'm a lurker!

#14

Re: ;-)))))

Jamie Donaldson

>

Re: I'm a lurker!

#15

Re: ..next step

Jeff from MA

>If you go deep into segmented turnings these tools will find thier proper place servicing your lathe. Maybe that's the way it was meant to be?

Re: I'm a lurker!

#16

Re: Yes it's addictive- my tablesaw...

Jeff Taylor - Bloomington, Indiana

>Hmmm, that is funny ... I use my tablesaw as a bench sometimes, but it DOES prove useful when cutting pen blanks on the sled. The bandsaw is great for a lot of things, but I just am still nostalgic about using the table saw (something about taming a dangerous creature and making it do my will (except for the semi-recent time when it took a 1/4" deep, 1/8", 2.5" long kerf out of my thumb from tip to 2nd knuckle)). I will admit, I still have a jointer new-in-box that I have never touched, but "someday" I will need to square a board edge better than thickness+router combo.

I am also the first to admit that I have a severe love affair with all things turned.

--jeff