We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Hey Guys!! Still haven't upgrades the lathe yet. I just got a flyer from "Woodcraft. They have a Nova 1624-44 on sale for $999.99. I researched it a little but but their not going to tell you about vibration, durability and what not. Thats why we novices have this group of guys. Any one got any thoughts on this one? Or should I stick with the 14" Jet for a grand or so? No snow in CrossPlains Yet!!
>I have had a Nova DVR for about 3 years now and love it. It runs smooth as glass after you get a piece in balance. IMHO it is definately worth the difference to spend the extra money over the Jet. I had a computer chip go bad one time and they sent me a new headstock which I received in a couple of days and then I just put my old headstock back in the box and UPS took it back with them. They paid shipping both ways and no hassle. And this was during the Christmas season!
>Couple of things I like about the Nova thats on sale is the very slow low end speed, and the large 1 1/2hp motor. You would also appreciate the 16" swing more than the Jets 14". The Jets low end speed may be to fast for large out of balance bowl blanks for instance.
>If the new Nova looks like the old Nova-3000 that was discontinued several years ago, thats because that is what it is. The only difference that I can see is that they have added reversing and a sheetmetal stand. It would be a good lathe if you are willing to change belts on step pulleys. I don't know of another quality lathe in that market. The problem is that everyone wants an electronic speed control.
You can add an electronic controlled drive for about $500. A lot of folks did that with the old Nova-3000, and many still prefer that to the newer DVR. At the time, it was the only reasonable lathe with electronic speed control for less that $2000.
Times have changed. At $1500+, you are getting into the same price range as the newer DVR, and one where there is a lot of competition. You can buy the 16" Jet and General for about $200 more, they have all of the same features as the new Nova, and they have the advantage of more weight and longer length.
>Russ said it right. "if you don't mind changing belts".
This lathe is probably the best option for a mid-range beginning turner. Assuming the beginner started on a Jet mini, they are already used to changing belts. Coughing up 2k for a new lathe is a lot of money if you aren't using it for a side business. 1k is a lot easier to negotiate an okay on from the wife. So you have to change belts? So what? You need to stop the lathe once in a while to rest anyways, right? So change a belt while you're resting and appreciating your work.
The Nova does have the slowest speed I've seen for the under 1k price. If I had the money right now, I'd be getting one for my Dad, who wants to start turning.
The legs on the Nova are a little spindly, but you can always mount the lathe on a bench or build your own stand. They also have a good warranty.
>I have an older Nova 3K that I've been using for 5+ years. Is it the best lathe on the market? Nope.
Is it the best NEW lathe under $1K? I'd be hard pressed to find a bette deal. Sure you can spend more to get more, but it's a great lathe for the money. I like variable speed adjustment, but I don't need it. 16" swing with a rotating headstock is very useful for bowl work and hollowing without having to hang over the ways.
If you need to buy one new, go ahead and buy with confidence. I've seen them selling 2nd hand for $500-700. I like mine, and even if I ever upgrade, I've probably gotten too emotionally attached to it to part ways.
Steve
P.S. Tim Geist is the Nova rep in the US and sometimes has refurbs.
>I recently bought one as a first lathe and I'm both impressed with the quality and am happy with my purchase. I was considering the NOVA and the Jet 1442. After a lot of thought I chose the NOVA and I have no regrets. As for the legs, someone mentioned they look spindly. I thought so too until I got my hands on them, they are very heavy duty and very sturdy. Would I prefer cast iron legs? Yes, but only to add mass because I don't think they'd be any sturdier. The NOVA legs are sturdy.
One other thing that's important is customer service. I've heard great things about Teknatool's customer service so that really help sway me toward the NOVA. Nothing worse than buying something and having problems and being all on your own. And wouldn't you know it after putting together the NOVA I was missing a couple of little items. I was very dismayed, so I called the 1-800 number and wasn't able to get through, it was Saturday. So I sent an email and waited. On Monday I was contacted by 3 people from Taknatool, one was an e-mail and two were phone calls. One call was from Tim Geist, their US rep. and the other was from a rep in New Zealand. Well the situation was remedied post haste and my confidence in Teknatool is greater than ever. I like their product and really like their customer service. So, I'd say buy the NOVA, I'd bet you'd be glad you did.
John, a one time lurker. (sorry, I couldn't help myself).
>I also bought a Nova 1624-44 and am delighted with it. It's a BIG step up from the 55 year old Shopsmith 10-ER I'd been using till now. The ONLY issue I have with it is the spindle height. It's around 43" and I need 48" so I have it on blocks which are not as rigid as I'd like but I couldn't wait for a permanent solution. I needed to TURN. I'll improve the height thing down the road.