Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Tool holder -this rack reduces ....

Posts

Tool holder -this rack reduces ....

#1

Tool holder -this rack reduces ....

Jamie Donaldson

>.. nicks and dings from banging tools, as well as holding a variety of other gadgets that easily get lost in shavings. Magnetic knife holder across back, and base made of old desk chair with rollers.


img

Re: Tool holder -this rack reduces ....

#2

Re: Tool holder -this rack reduces ....

Brodie Brickey

>I like your magnetic rail idea. I built a rack and on occaison, I have been known to knock one off while putting another on.

Brodie

Re: Tool holder -this rack reduces ....

#3

Re: Tool holder -this rack reduces ....

Bill Stehman

>Very nice tool rack Jamie. I wish I had not used those magnetic holders though. In time mine became magnetized and every itty bitty piece of steel wool or whatever clings to my tools.

Re: Tool holder -this rack reduces ....

#4

Re: I've never had a problem, but then.....

Jamie Donaldson

>.. I don't use steel wool either. I have a degaussing coil for my camera repair tools, but have never had to use it on turning tools. HSS doesn't seem to hold a charge as much as carbon steel, and I have never noticed the tool "sticking" to a rest. I think some of the related reports are in the category of urban shop legends-the theory doesn't manifest itself in practice.

Re: Tool holder -this rack reduces ....

#5

Re: I've never had a problem, but then.....

Gordon Seto

>Jamie,

It does. May be I was using a stronger magnet tool bars. I have problem with the small P&N detail gouges especially. They tend to stick to the tool rest. I don't have problem when starting the cut; but at the end of the cut. The magnetic was so strong, I couldn't demagnetize them with those de-magnet gadget for screw drivers. I have to get one that is plugged into AC.

Gordon

Re: Tool holder -this rack reduces ....

#6

Re: I've had allen keys pick up

Allen Neighbors

>magnetism from a magnetic dish I use to hold chuck screws when I'm changing jaws... but I don't think they are HSS. Just a thought...

Re: Tool holder -this rack reduces ....

#7

Re: A "lurker's" offering ...tool rack

Danny Wells

>This was originally plans for a clamp rack from Woodsmith, but I modified it. It's got more stuff hanging on it now. The backside is still empty. Works great.


img

Re: Tool holder -this rack reduces ....

#8

Re: A "lurker's" offering ...tool rack Pic 2

Danny Wells

>Here are the sides. When things slow down, I'm going to add some more to the sides. I don't know why it looks like it leans, but it doesn't.


img

Re: Tool holder -this rack reduces ....

#9

Bob Moffett

Re: A "lurker's" offering ...tool rack Pic 2

Bob Moffett

>That;s awesome! I can't imagine my tools being so well organized!

Re: Tool holder -this rack reduces ....

#10

Re: A "lurker's" offering ...tool rack Pic 2

John Bussom

>Bob, I am with you on that one, I spent most of Sunday trying to find my lathe!

That is a great idea Jamie and thanks for sharing it!

Lurker John

Re: Tool holder -this rack reduces ....

#11

Re: Danny obviously spends more time ....

Jamie Donaldson

>.. organizing than turning! And check out the wallpaper- that HOT! Does it make the shop feel warmer than looking at cinderblocks all day?? :-)))

Re: Tool holder -this rack reduces ....

#12

Re: Tool holder magnetism

Dinyar Chavda

>If there is a concern about magnetizing your tools, another option is what I had read about, and use, and that is a holder for fishing rods. For those like me whose only exposure to fishing is through the movies, these come 2 to a box, and have slots that are fairly deep, and have foam in them. So long as you put the same tool in the same slot, the foam does a great job of holding the tool in place.

It's cheap too, which appeals to my phrugal nature! :-)

Re: Tool holder -this rack reduces ....

#13

Re: Truly a nice tool rack,

Allen Neighbors

>and very well built and organized. I have a rolling rack that is really handy, too.

Thanks for posting this, Danny. It's good to share your work. :o)

Re: Tool holder -this rack reduces ....

#14

Re: Dinyar, how 'bout a pic?

Allen Neighbors

>I don't savvy the fishing rod holder. Don't know what you're talking about. I have a rolling rack that I'd like to rig up a better idea of holding the tools. Right now I use shortened peg board hooks to separate them.

Re: Tool holder -this rack reduces ....

#15

Re: Sticky tool..

Russ Fairfield

>Sticking tools are not an "Urban Legend".

The Woodcraft store where I teach classes has magnetic tool holders and cast iron tool rests. ALL of the tools are HSS, and ALL become magnetic to the point where they were sticky on the tool rests. Scrapers stuck so firmly that they became difficult to move. They were a constant aggravation until we brought in a small degaussing coil so I can demagnetize the tools as they are used. Now the large Roughing gouges are the only problem because they are too big for the coil.

Re: Tool holder -this rack reduces ....

#16

Re: Russ with a fishing pole

Russ Fairfield

>This is as close to fishing as I get anymore.


img

Re: Tool holder -this rack reduces ....

#17

Re: You and me, both, Russ. LOL!!

Allen Neighbors

>

Re: Tool holder -this rack reduces ....

#18

Barb Siddiqui

Re: A "lurker's" offering ...tool rack Pic 2

Barb Siddiqui

>Wow..that is amazing. Thanks Danny; I'll bet your 'modification' will be popping up in shops all over the place. Great design.

Re: Tool holder -this rack reduces ....

#19

Re: Tool holder -this rack reduces ....

Danny Wells

>Thanks all for the comments. Actually my shop looks a mess like everyone elses. I made the cart before I got started in my new shop.

The wallpaper is actually paint job on double doors. He did the walls that way as well in blue and green and a purple. I've painted over all the walls except for those in the pic. I like red...gives the shop some color.

Re: Tool holder -this rack reduces ....

#20

Re: Dinyar, how 'bout a pic?

Dinyar Chavda

>The one that I have is called a Berkley Horizontal Boat Rod Rack. They come two to a box, with slots for either 4 or 6 rods. You need a pair to store rods, but only one for tools. The picture shows my various tools ---the nice part is that you can use it for tools of different lengths. I've used these for about 5 years, and they seem to still hold the tools just fine. Hope this clarifies things.


img

Re: Tool holder -this rack reduces ....

#21

Just the solution I've been looking for

Ron McKinley

>That's about the best solution for holding tools I've seen. Hope you don't mind if I copy it.........Ron

Re: Tool holder -this rack reduces ....

#22

Re: Dinyar, how 'bout a pic?

Allen Neighbors

>Thanks, Dinyar, for clearing this up. I need some of those. They'll perfect my toolrack. Thanks again, for posting. :o)