Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

DC noise-partial solution by moving....

Posts

DC noise-partial solution by moving....

#1

DC noise-partial solution by moving....

Jamie Donaldson

>.. DC to corner of the shop and built this noise baffle out of plywood,lined with carpet and hinged for access. Remote on/off is one of my favorite toys, and the noise in the shop area around lathes is significantly less!


img

Re: DC noise-partial solution by moving....

#2

Re: DC noise-partial solution by moving....

Dale Cook

>Jamie, Thanks for posting this. I have the same dust collector it looks like and it would be nice to cut some of the noise. Thanks again.

Re: DC noise-partial solution by moving....

#3

Brian McKearney

Re: DC noise-partial solution by moving....

Brian McKearney

>Jamie,

Thanks for posting! The pic helps me visualize what you referred to in your reply to my post yesterday.

Brian

Re: DC noise-partial solution by moving....

#4

Re: DC noise-partial solution by moving....

David Breth

>Jamie -

I saw this earlier today and took a few pictures tonight to chip in. I've got the Grizzly version of that collector (GA0548), and was able to enclose it. It isn't an airtight enclosure, but it is "full". Three pictures, will require three posts because while somebody said a few weeks ago how you can load multiple pictures at once, I couldn't find the post....

First shot is of the enclosure from the outside, just shows the flex tube heading into a door, along with the tailstock on my JWT-1236 with the misaligned tailstock that really drives me nuts. The basement has a little three-walled alcove there, directly beneath our fireplace. All I really did was put the DC in there - which fit perfectly by chance - and put a door up.


img

Re: DC noise-partial solution by moving....

#5

Re: DC noise-partial solution by moving....

David Breth

>This picture is looking inside the enclosure. Difficult to open because of the DC hose, but you get the idea. What I'm trying to show here is not the DC, but the solid insulating material on the inside of the walls.


img

Re: DC noise-partial solution by moving....

#6

Re: DC noise-partial solution by moving....

David Breth

>And finally, the celing. I stuck a ton (very precise measurement) of fiberglass into the joists, and enclosed it, taking care to mark the location of wires, etc.

This is not an airtight solution, but rather, something very inexpensive I did to dampen noise. It has worked extremely well. I wear hearing protection there all the time when that baby is on, as a long-term precaution. I would not recommend anything but wearing protection, but the DC is nowhere near the shrill sound of my little shopvac, and is much less obtrusive to the famiy members three feet above the thing.

Hope this helps and doesn't count as a hijack.

David Breth


img