Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

spalted wood

Posts

spalted wood

#1

spalted wood

Bill McWhirter

>This may sound like a dumb question, but I am new to turning and have started collecting hunks of wood. Most of the stuff that I have found with significant spalting also has significant rot.

If I have a sound piece of wood, is there any "quick" way to get it to spalt without rotting? How long should it take? I live in South Georgia so both the humidity and the temperature are generally high and fungi and mold thrive.

Re: spalted wood

#2

Re: spalted wood

Allen Neighbors

>Bill, I read a post on here once where someone said they left a cherry log on the ground, and rolled it a little every few days.

I've never tried it, so maybe someone will chime in and give some real advice. :o)

Re: spalted wood

#3

Re: We've been talking about spalting ...

Jamie Donaldson

>... wood over on WOW. I enhance the natural process with a 50/50 mixture of Miracle Gro and beer. Place a wet piece of wood in a plastic bag with a puddle of mixture, keeping the ends wet by rotating each week. Check for excess fungus growth every week, and the process usually only takes 2~4 months depending on species.

Re: spalted wood

#4

Re: spalted wood

Don Henthorn

>I just left some red oak on the concrete floor of my shed and it spalted in five or six months.

Re: spalted wood

#5

Re: spalted wood

Thad

>This oak was cut live in Nov and roughed out last night. None of the spalt was problematic. Just sat on concrete exposed to central GA weather the past 2 months with the bark on. Apologies for the picture not being superb, but it's an example.


img

Re: spalted wood

#6

Re: spalted wood

David Breth

>I left a piece of wood on the sidewalk next to my garage throughout the summer, where it was exposed to sun, wind and rain, and finally got around to cutting it up. substantial spalting resulted.

You would have enjoyed some postings about a year and a half ago. There was a huge set of postings with people trading methods and theories on how to create spalting. I recall somebody using a backhoe to dig a hole, drop a giant log in it, cover it for X months, digging it out, posting photographs and the whole deal. Result: little or no spalting. I thought it was kind of humorous, hopefully the experimenter can see the humor too (now that some time has passed....).

David B.