Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Cracks; problem or design enhancement

Posts

Cracks; problem or design enhancement

#1

Cracks; problem or design enhancement

Bill MacLachlan

>I just working on my 3rd natural edge bowl of the weekend and have a question.

The wood is a beautiful piece of cherry c/w branch cross grain near the bottom third. But there is 1 noticeable crack starting from the top and going halfway into bowl. Then there are numerous small stress cracks present as well.

The color is good; the shape is good and all of the bark remained, so overall the bowl looks good.

But do these cracks detract from the overall design or add "character"? I will post a picture when completed.

Re: Cracks; problem or design enhancement

#2

Re: Bill-cracks in a cherry bowl rim.....

Jamie Donaldson

>... seldom can be repaired in any satisfactory manner, and can actually be a turning hazard. Most fruit woods have a tendancy to check, and require extra care in grain orientation, drying and turning.

Re: Cracks; problem or design enhancement

#3

Re: Cracks; problem or design enhancement

Norm Smith in Nova Scotia

>Bill, When I run into small cracks like the ones that I think that you are talking about I fill them with either brass, copper or pewter powder mixed with epoxy, depending on the colour of the wood. I dont try to blend them in but let them stand out a bit. I try for a slight contrast in colour. If done right, I think they enhance the turning.

Norm

Re: Cracks; problem or design enhancement

#4

Steven Antonucci

If the form is good, cracks won't detract

Steve Antonucci

>Some people make a living out of beating the snot out of perfectly good wood to make it look aged. I personally think that cracks, bugholes, spalting, rotten areas all talk to the living nature of wood and it's semi-permanence.

I also had a vision many years ago of not knowing what to do with these types of things, so I set them aside until I did. Cherry is too "precious" to waste- maybe a good one to come back to later.

Steve

Re: Cracks; problem or design enhancement

#5

Re: Cracks; problem or design enhancement

Wolf Kiessling

>Almost everything I turn cracks as I NEVER dry any wood because I prefer turning green. I treat the cracks as design enhancements and usually fill with something- coffee grounds, filings, inlace- unless, in some cases, I leave the crack and occasionally actually enlarge it or carve it into a certain shape.

When filling cracks, I never try to blend into the wood but deliberately make them contrast. What I have found is that most of the people who buy the bowls like the turquoise colored inlace the best, no matter what color the wood......

Re: Cracks; problem or design enhancement

#6

Re: Bill-cracks in a cherry bowl rim.....

adrien

>Boy, we're all different: I like to make a slurry with Danish oil and 150 grit cloth-backed sandpaper. A dash of CA glue on the filled area and the crack tends to fade into the grain. (It IS end grain in character and does tend to be a bit darker than the surrounding wood.)

I guess it depends on the original color of the wood. The above works best with dark woods.

Re: Cracks; problem or design enhancement

#7

Leo Van Der Loo

Just an idea

Leo Van Der Loo

>Take your torch and don't overdo it, but scorch the wood a bit, and cracks edges just a bit, than take a hard brush or soft brass wire brush and brush some of that charred wood off, should make it look good I think, your decision !!

Have fun and take care

Leo Van Der Loo