Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Maple burl bowl

Posts

Maple burl bowl

#1

Maple burl bowl

Bill MacLachlan

>This is Ebay wood I bought just to try and see how the experience and the wood looked. This is one where I can see improvement. It is consistent thickness and extremely light.

This is 1 of my options for the turning exchange. Still working on a couple more different selections and will choose the best.

Size = 5x3. Sanded to 2500. Finished with 3 coats of DEFT and buffed.

Critiques wanted.

Bill


img

Re: Maple burl bowl

#2

Re: Maple burl bowl

Carole Valentine

>Well now...it seems the diplomacy thread was not in vain, since it brought you out of the woodwork, Bill! :)) While I can't see the profile and base of this piece due to the camera angle, what I can see looks luscious - well turned and well finished. I would think anyone in the Exchange would be happy to display this in their collection. I am curious though - when you say "this is one where I can see improvement", what exactly do you like about it more than your other work?

Re: Maple burl bowl

#3

Re: Maple burl bowl

Kurt Rosenzweig

>Nice piece Bill! Great finish!

Re: Maple burl bowl

#4

Re: Maple burl bowl

Bill MacLachlan

>You mean I am not a lurker any more??

Where I can see improvement is in the consistent thickness. This has improved greatly over the last year. The inside transition from the side to the bottom seem much better as well. I also have better control of the tool, where I will try that last cut. I read someplace, "you do not know you've improved until you try that last cut". Before I would try the last cut and make a unwanted gouge or dig in and then would have a destroyed piece or major redesign.