Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

How to DIS a Turner.

Posts

How to DIS a Turner.

#1

How to DIS a Turner.

Barry Irby

>Not that anyone would want to Dis a fellow turner, but

Man! That was a Really NICE piece of wood!

Or, You have a great lathe!

Or, I can see that you spent a lot on these tools.

Best DC I have ever seen, not a shaving anywhere.

Maybe Richard Raffin would give you some one on one instruction.

Re: How to DIS a Turner.

#2

Re: How to DIS a Turner.

Mike Rubes, Apex, NC

>HA! Those are pretty funny. How about these:

That's nice. What is it?

That's nice. What does it do?

Is there supposed to be this hole in it?

What will it be when you are done? (even though the piece is finished)

Personal favorite is when I am working a show and people walk up and look over the table of stuff and ask with this incredulous voice "Did you make all this stuff?" I always want to just smile and say, "Nope, Wal-mart was having a sale!!!" It's amazing to me how

often that happens. I just take is a compliment :)

Mike

Re: How to DIS a Turner.

#3

Re: How to DIS a Turner.

John Lucas

>Mike you nailed it perfectly. I hear everyone of those when I bring a piece to work.

Another good one, "

Do people actually pay that much for that"

Or I could make that cheaper than that.

Re: How to DIS a Turner.

#4

Re: How to DIS a Turner.

Jamie Donaldson

>Your wood wouldn't look blue if you didn't use a blue background!!!

Re: How to DIS a Turner.

#5

LOL

Barbara Gill, Remlik VA

>

Re: How to DIS a Turner.

#6

Re: How to DIS a Turner.

Ron in Drums PA

>Customer, "Ooh, That's Nice... But why did you use plastic for the finial instead of wood?"

Turner, "It is wood, its called ebony"

Re: How to DIS a Turner.

#7

Re: How to DIS a Turner.

John Lucas

>Do you actually use all those tools?

Do you need that many chucks?

How many lathes do you have?

Re: How to DIS a Turner.

#8

Re: John-I thought you were divorced already!!

Jamie Donaldson

>

Re: How to DIS a Turner.

#9

Steven Antonucci

Go to Pier 1.

Steve Antonucci

>You'll see 3' tall hollow glued up bamboo vessels for $20. That's a kick in the backside.

Go to Ikea and see nicely crafted wooden bowls for $6. Ouch.

Go to the Woodworking shows and see the laser engraving guy handing out wooden pens with your name engraved for free. Oof.

Steve

Re: How to DIS a Turner.

#10

How about this?

Dominic Greco

>"Oh! That's a beautiful peppermill! I saw one like it in William-Sonoma $40 and thought that it was waaaaay too expensive! How much are you selling this one for again?"

OR (one of my favorites)

"Since I'm spending XXX for this bowl, can you throw in that 'small' bowl for free? or "How about a quantity discount?" (while they hold (2) $10 items).

OR my favorite one of all time!

"You made all these? You must have too much time on your hands!"

Each of the above quotes are from actual conversations. Yeah, sad isn't it?

See ya around,

Dominic

Re: How to DIS a Turner.

#11

That was my dog speaking

John Lucas

>

Re: How to DIS a Turner.

#12

Brad Vietje

Had to laugh at this one...

Brad Vietje

>I went to my first pre-Chrismas craft fair about 4 years ago with some pretty nice hollow ornaments in pretty woods with Ebony finials. I had fussed over them a lot more than I should have to make them super-light, and added little details that in truth, only another turner would notice or even care about. I was selling them for $24.00, or about 1/3 what I would sell them for now.

So, along comes this old lady and her 50'ish daughter, and after overhearing (or not quite hearing...) me describe the hollow ornament turning process to a lady who was delighted to buy two of them, the old lady walks away disgusted and says to her daughter "... so he just makes that round wooden ball and glues on that black plastic thing... so where's the skill in that ? That's not worth $ 24.00 of MY money!..."

Just shows to go ya, some people will just never get it, and sometimes a really careful finishing job just looks like black plastic anyway. Thanks for the chuckle.

Safe spinning,

Brad Vietje

Newbury, VT

Re: How to DIS a Turner.

#13

Re: How to DIS a Turner.

Roger Smith

>"Why would you sell it, if you think it is that good?"

Re: How to DIS a Turner.

#14

Re: As the ol'country Philosopher ....

Jamie Donaldson

>......once said, "sometimes there jist ain't no accountin' fer good taste!" ;-))))

Re: How to DIS a Turner.

#15

tranlate DIS

Jorge Castaneda

>In this island, DIS stands for Deer Isle-Stonington (Maine)

and it is used mostly by the school district

What do you mean:

dismantle in seconds?

dismember innards suddendly?

disperse inside stuff?

Jorge

wandering in Stonington...

Re: How to DIS a Turner.

#16

Steven Antonucci

DISrespect

Steve Antonucci

>

Re: How to DIS a Turner.

#17

Re: Had to laugh at this one...

Mike Rubes, Apex, NC

>Hi Brad,

That is too funny! I nearly snarfed water on my keyboard reading that one! I can just hear the disdain in the lady's voice as she heads away from your table!

Long story short I've had a very similar experience and laugh just as hard about it now, years later, as I did then.

Thanks for the chuckle :)

Mike

Re: How to DIS a Turner.

#18

Re: How to DIS a Turner.

David Walser

>An artistically delivered DIS is complimentary on it's face while dismissive in it's real meaing. Or, it might build someone up before slamming them to the mat.

"That's a very well done practice piece."

"Wow! You sure make good use of free wood."

"How interesting! I'm not sure which catches my eye first, your departure from good form or the way the ripples in the finish almost hide the tool marks."

Re: How to DIS a Turner.

#19

Molto Grazie!

Jorge Castaneda

>

Re: How to DIS a Turner.

#20

Oh Ouch - that was a good one!

Marianne Lee

>