Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Needle Scaler for Enhancement

Posts

Needle Scaler for Enhancement

#1

Needle Scaler for Enhancement

Ken

>Harbor Freight has a needle scaler on sale for $29.99. Regular price $59.99. I have seen postings here from people that have used a needle scaler. The one on sale says it has a 1 1/8" stroke. It seems that this would be rather difficult to control in use on a bowl. Is this similar to what you have used? If so do you modify it in some way to reduce the stroke? Or can it be used as is?

Thanks,

Ken

Re: Needle Scaler for Enhancement

#2

Re: Needle Scaler for Enhancement

Greg Haugen

>Ok, I have a very good friend in our local club that has that scaler and doesn't like it. It has alot more needles than the one that is usually used and is also HUGE. She's a small lady and it take both hands to hold on to it. I'm not small by any means, and its a bit large for me. I have a Sioux Mini that I bought from the local Welding Supply for 69. That is the one that is used most often. It is small, 12" long max the other is more 20" long. It also has 12 needles, not too many not too little. The other has 18-20 and a larger area. In my view it is worth spending the money on the Sioux, watch for it on sale. You'll be alot happier. That beast the harbor freight sells is just too large. In my opinion, and you know the saying about opinions.

Greg

Re: Needle Scaler for Enhancement

#3

Re: Needle Scaler for Enhancement

Molly Winton

>Hey Ken, the one I have I bought at HF for something like $12.99. It attaches to my air hammer. I rounded off each of the needle ends and it works like a charm. I have no idea about the one you mention. When it comes to 'strokes' I don't know a stroke from a caress, so can't help you with that. Should I tilt my head and giggle here?

Bottom line: go for cheap and easy. I got my air gun for $5.99, so even if you don't have one of those, the two together is cheaper than $29.99. Oh look, I can at least add! giggle

Re: Needle Scaler for Enhancement

#4

Re: Needle Scaler for Enhancement

Raymond Overman in SC

>I'm easy Molly, but I'm not cheap. (no giggling required)

I have the same HF needle scaler you have but have a husky air hammer that came with my compressor. I agree with you on the HF air hammer/needles combo since you'll never give it the workout that a welder would. It works like a charm.

Re: Needle Scaler for Enhancement

#5

Need help with the scaler!

John Scheideman

>I bought the large needle scaler from HF about a month ago when it was supposedly "on sale" for about $49. I brought it home and tried it and couldn't get it to make any impression in the wood at all. Obviously, I must have been doing something wrong....not enough air pressure? Do you sharpen the needles?

I was frustrated and ended up taking it back. I may consider getting another one if I was sure it would work! Any suggestions?

John

Re: Needle Scaler for Enhancement

#6

Re: Needle Scaler for Enhancement

Juergen

>Like Molly configuration this is similar to my setup. I find the pistol grip makes it easier to control. The trick is to hold the turning in your hand supported by your thigh or hip. Also remove the pins and round the tips to soften the impression. Make sure the pins move freely after reassembly. The other caution I have is to make sure the inside diameter of the scaler = the outside diameter of the air hammer

Air Hammer

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=32940

Scaler

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=1109

Re: Needle Scaler for Enhancement

#7

Re: Needle Scaler for Enhancement

James Fox

>Juergen, thanks for taking the time to post the url's of the items you and Molly were talking about. It makes it much easier for those of us who are a bit clueless about these things.

James

Re: Needle Scaler for Enhancement

#8

Re: Needle Scaler for Enhancement

Allen Neighbors

>John, does that needle replacement set fit somehow onto the air hammer?

Re: Needle Scaler for Enhancement

#9

Re: Needle Scaler for Enhancement

James Fox

>Juergen, I have both the air hammer and needles (1109) from HF. How do the needles (which is all 1109 is) fit in the air hammer???

James

Re: Needle Scaler for Enhancement

#10

Re: Jeurgen, sorry.

Allen Neighbors

>That question is for Jeurgen, not John. Do those replacement needles fit into the airhammer?