Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

What's Your favorite live tail center

Posts

What's Your favorite live tail center

#1

What's Your favorite live tail center

john lucas

>I thought everyone would find this interesting. We tend to stay with the live center that comes with the lathe unless you need something else. Years ago I did need something else so I bought a Nova live center. It comes with several different points that have been very useful. The tips are a very short #2 morse taper which has been very useful at times. I have used them in the drive spindle on occasion especially the one that has a screw thread.

The live center morse taper is hollow so you can use it with a 3/8" lamp auger.

The screw thread point for the live center has a 5/16 x 18 thread on the inside. This makes it very easy to add all sorts of special things to your live or drive center.

Then it's also very easy to make wooden adaptors for special projects. Pictured are some of the ones I use the most.

I have used this center for hundreds and hundreds of projects, big and small and still haven't had to replace the bearings.

The only downside is the hollow center. On lathes that don't have a self ejecting quill feed you have to knock out the live center. The knock out bar goes right into the hole and only knocks out the center point. I simply put a piece of wood or my skew between the back of the live center and the tailstock and crank it back. It pops it out quite easily and as far as I can tell has never hurt the bearing.


img

Re: What's Your favorite live tail center

#2

Re: What's Your favorite live tail center

Russ Babbitt

>My favorite one seems to be the one I find first.

Re: What's Your favorite live tail center

#3

Re: What's Your favorite live tail center

Lan Brady

>Mine is from Harbor Freight, It is intended for metal lathes, but I like the extra room on the longer point.

Lan

Re: What's Your favorite live tail center

#4

Steb

Peter Teubel

>The revolving Steb centers are my go-to live centers. Superior grip. The Oneway with an adapter to mount my chuck is my next favorite.

Re: What's Your favorite live tail center

#5

Re: What's Your favorite live tail center

John Kyler

>Sorby Deluxe set. But likely would not have it if not for a big discount.

Re: What's Your favorite live tail center

#6

Re:Ever stick a small washer on that point?

Al Crandall (N.E. of Indy)

>Sometimes those 60 degree centers from metal lathes have a tedancy to bore deeper and deeper as time passes. A small metal washer on the point first will act as a depth stop.

Re: What's Your favorite live tail center

#7

Re: What's Your favorite live tail center

Allen Neighbors

>I really do like my Oneway live center. I use it with and without the point, and sometimes the Chuck mount.

I also like the looks of your Nova live center, John; especially the fact about the 5/16-18 threads inside.

I may have to have one of those.

Re: What's Your favorite live tail center

#8

Re: What's Your favorite live tail center

john lucas

>Allen This photo should make it clearer how the threaded insert works. It has a screw thread on the outside and 5/16 machine thread in the insert. Then the #2 morse taper goes into the tailcenter. At one time I made a special screw to fit cabinet knobs but I must have misplaced that. I would use the insert in my headstock instead of the live center. This let me just screw the wood on, turn the knob and was done with the threaded hole already in the knob.


img

Re: What's Your favorite live tail center

#9

Re: What's Your favorite live tail center

Barry Irby

>John, Isn't that a ball bearing center? Free spinning? How do use it in the head stock? Can you lock it? Or am I just confused, again?

Re: What's Your favorite live tail center

#10

You aren't alone

Bill Howatt

>I find this thread confusing. Says Live Tail center but discussion has a lot of headstock use which I guess is fair enough since you can put them in the headstock. However, I am under the impression that a live center freely rotates and the discussion seems to be more about using dead centers.

Bill

Re: What's Your favorite live tail center

#11

Re: Thanks for taking

Allen Neighbors

>the time, John. That is a nice system.

Re: What's Your favorite live tail center

#12

Re: I think what he meant,

Allen Neighbors

>was that he uses the small morse tapered piece (center in photo) in the headstock... not the live center.

Re: What's Your favorite live tail center

#13

You are correct Allen

John Lucas

>