WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

First finished bowl... comments or suggestions?

Posts

First finished bowl... comments or suggestions?

#1

First finished bowl... comments or suggestions?

Pat from MD

>I'm brand new and just finished my first bowl. It's cherry, sanded up to 12000 and finished with a typical lathe polish and wax stick. It was going to be a natural edge, until I busted the top 1" off during final turning... now it's a bit shorter! ;) It's about 3.5" high and 5" across the rim. The wall is about 1/4".

Comments and suggestions are requested.

Thanks,

Pat


img

Re: First finished bowl... comments or suggestions?

#2

Re: First finished bowl... comments or suggestions

Mike Schwing from Md.

>Keep up the good work, and never sell or give this piece away.

Re: First finished bowl... comments or suggestions?

#3

Great Start!

Jennifer@Indy.USA

>Hi Pat,

Welcome to woodturning! You've taken the first step in what will certainly be a longtime hobby and bring you lots of fun and pleasure. Your little bowl looks great from here. It looks like you made a great save when the top broke off. If you hadn't told us of that little mishap, we would never have known. your finish looks great from here too. One of the things that I found when I was starting bowl turning and that I find when I teach a beginners bowl turning class is that one of the first things overlooked when starting out is the shape towards the bottom of the bowl. Often times this is because we are using a chuck and we let the size of the chuck/jaws determine the size and shape of the bottom of the bowl. One way to get around that is to utilize a variety of different ways to reverse the bowl after finishing the outside shape and hollowing out of it. Reversing the bowl using jamb chucks, or a vacuum chuck in order to shape and finish the bottom of the piece will help in allowing you to get your tools in there to curve the bottom so that it also has a nice shape and sits on the table a bit more lightly and not to appear "stuck" to the table. These are all things that many of us learn by trial and error, and with the help and guidance of this great place called WoodCentral :) Enjoy the ride Pat and keep posting your work!

Jennifer

Re: First finished bowl... comments or suggestions?

#4

Re: First finished bowl... comments or suggestions

Jennifer@Indy.USA

>Hi Mike!

Where the heck have you been? Running like Forrest Gump? Nice to see your name pop up! Hope all is well with you and that you've been turning some. I agree with you...never give away that first bowl!

Jen :)

Re: First finished bowl... comments or suggestions?

#5

Re: First finished bowl... comments or suggestions

Jim Rutten

>I agree Jennifer. I talked to Mike at the Kansas City symposium and then he seemed to fall off the face of the earth. I thought maybe he decided after meeting me if I was into woodturning they would just let anyone in so he decided to stop. ;) I hoped that wasn't the case. It's good to see your name Mike.

Re: First finished bowl... comments or suggestions?

#6

Re: Great Start!

David Breth

>My first reaction was "what a pretty little bowl". I like it a lot - has a very soft appearance.

I tend to agree with Jennifer, in thinking that a continuation of the curve toward the underside of the bowl would help make it look elevated from the surface. As you experiment with different ways to accomplish that, you'll try all kinds of goofball approaches, and to me that's when it becomes a heck of a lot of fun.

My first bowl was walnut, that is about two millimeters shy of being a lampshade. The finish is terrible, but I still like the basic shape on it a lot. And like yours, it isn't going anywhere.

Enjoy!

David B.

Re: First finished bowl... comments or suggestions?

#7

Re: First finished bowl... comments or suggestions

Robert Henderson

>Funny, that looks exactly like my first bowl. I was trying to get more of a soup bowl look, but I kept getting catches and cleaning them up left me with that shape. My subsequent efforts keep getting closer to my vision, but I'm still not dead on.

I agree, never give up your first effort.

Years from now you will look at it and say, "Wow, I am so much more skilled now!" and "Wow, I wasn't anywhere near as bad as I remembered. This is not bad for my first effort!"

Re: First finished bowl... comments or suggestions?

#8

Re: Great Start!

Barbara Gill, Remlik VA

>It sure looks better than my first bowl! I think you will find that it is easier not to have the straight walls as you have near the bottom. Curved is easier to navigate.

You might try getting a little better picture next time as the one you posted is out of focus except for the very front of the bowl.

Re: First finished bowl... comments or suggestions?

#9

Re: First finished bowl... comments or suggestions

GaryG in MD

>Pat,

Welcome to the Obsession. I agree with everything said above. Let me add a couple things.

Where are you in MD? There are a number of turning clubs here -- you will definitely (!) want to join one. It is well worth it even if you have to drive an hour each way (which I do). There are clubs in the DC area, Annapolis, Baltimore, (I think Frederick), and we have just started a new one in Montgomery County which meets in Rockville. Send me an email, if you like, and we can talk about it.

There are a couple of philosophies about design. One philosophy is to just attack the wood and see what comes out. That's fun, but you don't always get the best out of the wood that way, and you may end up with more shavings than product (DAMHIK). Another school recommends doing some preliminary design. For each blank you have, take a moment to think about what you "see" in there, and take the time to sketch it on paper. This will help a lot. You may find that, at first, you can profit from making a scale drawing and cutting out a pattern that you can use as a template as you are turning away material. I still do this on pieces that I want to look a certain way, and I find it valuable. Other times, I'll just get in there and make some shavings and see what comes out. Nevertheless, it's good to have a desired shape in mind. Look at the work displayed here; look at glass and pottery shapes -- what's fun is that every piece will come out different.

Photography is very important. Regardless of what kind of camera you have, you should be able to get a sharp image. There are plenty of people here who will help you with that if you need it.

Cheers, Gary

Re: First finished bowl... comments or suggestions?

#10

Re: First finished bowl... comments or suggestions

Pat from MD

>Thanks Gary. I'm in Cabin John, and I attended the first meeting of the Mont. County Woodturners (I was the brand new, young guy standing in the front). I think that the interaction is important for learning, and I'll be back for more meetings. I'm glad that the MCW started up (just in time for me..) so I don't have to drive too far.

Thanks for the tip on planning. I can see the benefit of spending some time doing more planning, and some time improvising as well. I've done lots of reading, and seem to be getting the hang of some different methods, but I'm really looking forward to the demo's at the club meetings. Any idea if they've started the website yet, or where it will be? I've started a site of my own to document my learning curve (I think it will be fun to look back at later) but I won't include the link here until I double-check the forum policy on posting links to personal sites.

Thanks again, and please introduce yourself at the next meeting!

FYI, I found some nice maple cut in logs this in bethesda this past weekend, and there's still some there for pickup if you want some. Email me for directions.

Re: First finished bowl... comments or suggestions?

#11

Re: It never fails- the first bowl becomes...

Jamie Donaldson

>... a cup, and they are much harder to make than a bowl because of the quick transition from inside wall to bottom as you now know. But beginners are having so much fun cutting the wood that it quickly becomes cup sized, and the flowing curves of a bowl will come with practice. Sanding and finish look very well done, and thats harder than the turning!

Re: First finished bowl... comments or suggestions?

#12

Re: First finished bowl... comments or suggestions

Cyril Griesbach

>Way to go, Pat, and welcome to woodturning. I'm once again reminded of my first bowl as I have just discussed on Ellis' survey in an eariler thread. You've done well. Never give this one up.

Cyril

Re: First finished bowl... comments or suggestions?

#13

Re: It never fails- the first bowl becomes...

David Breth

>I was going to comment on the finish earlier, but thought I must be missing something. I didn't see any tool marks or sanding marks at all, and the finish looks even and well done. Galaxies away from where my first bowl was.

David B.

Re: First finished bowl... comments or suggestions?

#14

Re: It never fails- the first bowl becomes...

Pat from MD

>Thanks! The previous photo had the inside out of focus, and this photo shows it better. The outside is pretty clean, but you can see a few marks on the inside. It's not perfect, but to be honest it came out much better than I expected.

I appreciate the feedback everyone, both positive and negative. Thanks!


img

Re: First finished bowl... comments or suggestions?

#15

I never left

Mike Schwing from Md.

>Good to know I'm missed! A year off devoted to ultra distance triathlon turned into 2 years due to buying a new house with no shop. I'm now in the process of designing my new woodshop so I can get back to business! I check in here and on WOW daily, but with nothing to post, I mostly just complement folks on turning nice things that make me almost wish I was back in the old house so I could turn, too.

Soon enough!