WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Kuari hollow form PIC

Posts

Kuari hollow form PIC

#1

Kuari hollow form PIC

Mike Rubes, Apex, NC

>Hi all,

I've been playing with my new Jordan hollowing tools and this is one I just finished today. To be honest, the form is ok, but it was the wood that was really special! For my birthday last week my dad gave me a box of New Zealand Kuari that he had bought on the web. This wood was harvested from a bog in New Zealand and is somewhere between 30,000 and 50,000 years old!!! The gee-whiz-neat-o factor is through the roof for me on this! This could be the oldest piece of non-petrified wood ever posted on WC? :) I liked working the wood. The coloring is not that spectacular, but it is better in person than the pics. It was fairly soft. Somewhat softer than, say walnut, but harder than poplar.

The pice is about 5 inches high and 3 in diameter. Sanded to 1200 or so and T&T varnish followed by buffing with Bealle. It is about as thin as I could go, about 1/8" in most places, maybe a little thicker righ in the fat spot of the shoulder.

Comments and critiques are welcome.






Mike

Wood from before the pyramids in Apex, NC!!!

Re: Kuari hollow form PIC

#2

Re: Kuari hollow form PIC

Steve in NC

>Mike

I like the form. You are brave to take the walls so thin given the unique nature of the wood. Was the blank dry when you started. I assume it was saturated when harvested.

In any event, it is fun to have a piece with such a great history.

Nice work

Steve

Re: Kuari hollow form PIC

#3

Re: Kuari hollow form PIC

Mike Rubes, Apex, NC

>Hi Steve,

Thanks! Yes, it was quite dry when I started. I didn't get shavings at all from the inside, just dust!

I've got a bit more of it to play with, so I think I'll get some open bowls and a few more hollowforms before I am said and done.

Good luck with that lathe purchase!

Mike

More ideas than time in Apex, NC...

Re: Kuari hollow form PIC

#4

Hi Mike

Dominic Greco in Richboro PA

>Mike,

Gotta' love those little hollow forms! Looks like you're getting some heavy practice with that new hollower.

That is some very cool wood, isn't it? Think that it was buried and preserved for all that time totally blows my mind.

You wrote:

"This could be the oldest piece of non-petrified wood ever posted on WC? :) "

Sorry to tell you this, :>( but I posted pics of some pens I turned from 50K Year old Kauri about 2 years ago! I attached it to this post. The last three pens are turned from Kauri. While the figure isn't terribly spectacular, the fact that they were made from such old wood really was their key selling point.

See ya around,

Dominic


img

Re: Kuari hollow form PIC

#5

Re: Hi Dom!

Mike Rubes, Apex, NC

>Hi Dom,

HA!! No worries :) I thought I remembered someone posting a pic of Kauri before, but I couldn't remember and couldn't find it! I like those pens, nice stuff.

Turning this was pretty neat. Even as soft as it was, it takes a nice shine. I got 4 good size pieces of it for my birthday, so I may try an open bowl next.

So far I really like the Jordan hollower. The straight tool cuts like a dream and I am learning to use the swan-neck. The only thing "bad" I've discovered is that when doing a smaller mouthed opening like this one, I cannot curve the tool back up to get the shoulders. I need a bigger mouth (HA) or a more curvey tool. I ended up using my shop made allenwrench tool to clean up just under the shoulders of this piece. It worked ok. On bigger pieces, I think the Jordan tool will really shine, though.

I hope all is well in PA.

Talk to you later,

Mike

Almost feels like Winter in Apex, NC!!

Re: Kuari hollow form PIC

#6

Re: Kuari hollow form PIC

georgetroy

>I would suggest no ridge at the top, let the curve flow. Consider Deft Clear wood lacquer for a sealer before oiling. Nice looking job thanks for showing. GT

Re: Kuari hollow form PIC

#7

Re: Kuari hollow form PIC

Jennifer@Indy.USA

>Hey Mike,

The Jordan hollowers are nice aren't they? I have one and just love it. This is a great looking piece. I like the collar you incorporated. If I had one constructive comment to make on the form, it would be as Wally says, to tuck the bottom in right where it sits on the table. This might give it a lighter look and not appear to be "stuck" to the table. After you use your parting tool to cut into the foot of the piece where it's going to end, leave about a 1" nib to hold it and then just come in with your gouge and roll over those hard corners, and then continue parting off. Other than that point, a really nice piece.

Jen

Re: Kuari hollow form PIC

#8

Mike, have you tried,...

Dominic Greco

>hollowing the way that John Jordan does in his video? He turns the exterior to shape and leaves a cylinder at the top where the collar will be. He parts off this cylinder and saves it. Then he hollows through the larger hole. After he's done hollowing, he matches the grain up and glues the cylinder back on. Next he forms the collar.

See ya around,

Dominic

Re: Kuari hollow form PIC

#9

Re: Mike, have you tried,...

Mike Rubes, Apex, NC

>Hi Dom,

I didn't know that's how it could be done, I'd never thought of that. Interesting approach. As long as you starting to work the collar details so the line fell into on of those grooves, it would be virtuatlly undetectable.

Very interesting, thanks!

I've just been squirming my way inside adn taking little bites! :)

Thanks for the idea,

Mike

Re: Kuari hollow form PIC

#10

Re: Kuari hollow form PIC

Mike Rubes, Apex, NC

>Hi all,

Thanks for the comments and good suggestions!

I appreciate them all.

Mike

Indoor soccer = sore knees in Apex, NC...