Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Adapter question for Nova Chuck

Posts

Adapter question for Nova Chuck

#1

Adapter question for Nova Chuck

Clem Wixted, Jonesboro, AR

>I have the original Nova chuck that uses an insert and I would like to get an insert to fit my Powermatic 3520a with a 1-1/4 X 8 thread.

Will the Nova type "L" insert fit my spindle and chuck?

I have received conflicting information regarding inserts for my original Nova chuck. Now I am asking the experts for the correct information.

Thanks,

Clem

Re: Adapter question for Nova Chuck

#2

Re: Adapter question for Nova Chuck

Russ Babbitt Jr.

>"FEATURES/BENEFITS

Inserts are interchangeable between the Nova, Precision Midi, G3, SuperNova and SuperNova Deluxe and Nova Titan Chucks. The Compac chuck does not use the insert system.

Inexpensive - if you change your lathe, no need to change your chucks and accessories, only need to change your insert! "

I got this from the Teknatool site. Hope this helps.

Re: Adapter question for Nova Chuck

#3

Re: Adapter question for Nova Chuck

Gordon Seto

>Clem,

The insert "L" will fit 1�" X 8 TPI spindle. It also provide a grub screw that matches the location of the groove on DVR spindle (to prevent the chuck coming loose during reverse). The grub screw would land on the flat part of the groove and won't damage the spindle thread. That location may not fit Powermatic.

You can email Tim Geist, the US rep:

service@teknatool.com

or Charles at Woodchips:

sales@woodchipshome.com

to verify.

Gordon

Re: Adapter question for Nova Chuck

#4

Russ and Gordon

Clem Wixted, Jonesboro, AR

>Thanks, "experts", that's the information I needed.

Clem