WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

To Post multiple images in a single post

Posts

To Post multiple images in a single post

#1

To Post multiple images in a single post

Ron in Drums PA

>.

.

To post multiple images in a single post you first must have your images uploaded somewhere on the internet.

Below you can see the code that you need to enter into the message box.

Repeat as many times as you have photos

Replace the red text with your image location:


This is what the code looks like for the image below:



Re: To Post multiple images in a single post

#2

Brad Vietje

Re: To Post multiple images in a single post

Brad Vietje

>Thanks, Ron -- and a real nice Cherry Burl bowl there, too !

Safe spinning,

Brad Vietje

Newbury, VT

Re: To Post multiple images in a single post

#3

Thanks, Ron

AndiWolfe

>

Re: To Post multiple images in a single post

#4

I just had to try this…

Rod Peterson -- Ormond Beach

>I saw that you made JPG images of the URLs, presumably to avoid the pitfalls that attend trying to post HTML scripts on the site (my old friend Dave Arbuckle—where is he?—taught me the trick to avoid that). Since I've been playing more and more with CSS (cascading style sheets), I thought I'd see if I could reproduce the URLs in your images with HTML/CSS. Voila!

 

<img src="http://image_location/pic.jpg">

You may note the URL wrapping below. That's because with your JPG, the site software had to widen the screen to accommodate it (on my 800 px wide screen—you guys with 1024 width never saw it), but text gets wrapped. Again, if you have a 1024 px screen width, it probably didn't.

 

<img src=
"http://simplyturning.com/stuff/photos/photo11.jpg">



I left out the bowl. That's routine stuff.

Rod

Re: To Post multiple images in a single post

#5

Re: I just had to try this�

Ron in Drums PA

><img src="http://simplyturning.com/stuff/photos/photo11.jpg">

Neat, thanks!

Re: To Post multiple images in a single post

#6

The trick.

Rod Peterson -- Ormond Beach

>What Dave Arbuckle taught me was that if you “trick” the message software into displaying the < and > symbols by using the & entities (otherwise just typing the < and > symbols makes them invisible), you're okay. However, when you preview your message, the editable text below the preview text converts the entities into the characters they represent. If you Post the message from the preview screen, all the characters displayed as entities in your original text are processed as if they were the actual typed characters. It doesn't matter if all you are using the entities for is … or — (ellipses and em dash) or fractions (½, ¼, and ¾), but them arrows is tricky.

So, always go back to the original screen to edit and re-preview whenever you're using the entities, and when you're finished with the editing Post from it (the original screen). I hope that's understandable.

Rod

Re: To Post multiple images in a single post

#7

Re: The trick.

Ron in Drums PA

>Thanks,

I picked up on that when I did a preview.

Thank goodness for a back button