WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

New Nova 1624-44

Posts

New Nova 1624-44

#1

New Nova 1624-44

RevDoug

>OK, now I have seen it. Woodcraft does indeed have it in the stores now. Yes, it is 8 speeds changed by moving the belt from one pully to the next. Yes, the slowest speed is a reported 214, but it looks pretty slow spinning away with nothing on it. Yes, the unit as a whole looks really nice. The fit and finish is awefully good for a lathe in this price range. Even inside the pully box, the paint was complete and smooth. The motor ran smooth and quiet. On the slowest setting you could see the hole in the shaft on the back side of the headstock, not so fast that it bacame a blur at all. The tail stock and tool rest slid on the bed ways smoothly and without effort. The lock seems to be rock solid. The first time I locked the tool rest it moved with moderate effort, but I cranked the lock handle a bit more and the tool rest sat still with both a hard pull and a sharp rap of the hand. the head stock does not slide down to the end of the bed, but it does rotate. I was told and shown how it has a positive lock when it is back in line with the ways. All in all this looks like a great lathe for the dollars. A test drive would tell more. But, at least I did get to see it in person and see/hear it run. Anyone have any further info on this new piece of equipment?

Turn 'em round,

Re: New Nova 1624-44

#2

It's not really new...

Peter Teubel

>It's just numerous improvements upon a proven design (i.e. Nova 3000). The major ones are a stronger bed design, better tailstock, reversible motor.

Re: New Nova 1624-44

#3

Re: It's not really new...

John Lucas

>I agree, it's a revamped 3000. It is an excellent machine. I turned on one a few weeks ago. It's like a new and improved 3000. I really like the tool rest banjo and bed much better than the old one.

Re: New Nova 1624-44

#4

Steven Antonucci

I think it's a great lathe too...but

Steve Antonucci

>I'm basing my opinion on my Nova 3000. I've made a bunch of things on it, and for the money, I don't think there's a better new lathe on the market.

If you can find a set of the cast iron legs to go with it, it's a great platform to hone your turning skills and produce fine work.

Steve

Re: New Nova 1624-44

#5

Re: New Nova 1624-44

Russ Babbitt Jr.

>"Yes, it is 8 speeds changed by moving the belt from one pully to the next."

Is this really and 8 pulley machine? I've tried to figure out how it changes speeds. I was under the assumption it had at least 8 speed buttons and was unclear if the user or manufacturer set the speeds. I have not been able to see a good picture of the operator panel or see the owners manual.

Re: New Nova 1624-44

#6

Re: New Nova 1624-44

Bruce Wiseman

>Yes it is pulley and belt drive. What appears to be buttons on the front are really little windows showing what speed the belt is on. The first time you sand something they all get covered in fine dust and you can't see through them, easy to clean them off though.

Re: New Nova 1624-44

#7

Re: New Nova 1624-44

RevDoug

>The cast iron legs that are mentioned above are (or will be) available at CSUSA. The legs that come on it look like they work well and are pretty solid, but the cast would be better. I'm thinking hard about this one.

Turn 'em round,

Re: New Nova 1624-44

#8

BTW, Thanks for the responsese!

RevDoug

>