Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

fingernail bowl gouges

Posts

fingernail bowl gouges

#1

fingernail bowl gouges

Larry LaVictoire

>I am new at woodturning and I love it, except for my two fingernail bowl gouges. No matter what I do I catch them on my pieces I'm turning and "there they go", flying in the air after they fly out of my chuck, because I'm not sure how to use these fingernail gouges. I have tried and tried and all I'm getting is "gun-shy", and I don't want to get like that.

Can anyone help me with some good advise on how to use these tools?

Any photos, or anything will be highly appreciated..

Thanks

Re: fingernail bowl gouges

#2

Re: fingernail bowl gouges

Greg Haugen

>When you're turning where is your flute pointing? (9:00? etc.) When I'm turning the outside of a bowl or roughing I would say my flute is about 10:30 to the left. When I'm on the inside I'm more on the 2:00 range to the right. It sounds like the flute maybe too far vertical and the bowl is grabbing the edge in rotation. Either the direction the top edge has to stay out of the way. Roll it over more.

Is it possible to get a picture of the grind? Just wondering if you have "wings" on the gouge. That will do it too.

What kind of chuck are you using?

Hope it helps,

Greg

Re: fingernail bowl gouges

#3

Peter Charles Fagg (UK)

Re: fingernail bowl gouges *LINK*

Peter Charles Fagg (UK)

>Larry, do not despair, all these things are sent to try us!

Please take a moment to read the link, I realise that it refers to the Robert Sorby fingernail gouge but the information is the same whomsoever makes the gouge or grinds the angles.

Regards, Peter.


http://www.newwoodworker.com/reviews/srbyfngnlrvu.html

Re: fingernail bowl gouges

#4

Re: fingernail bowl gouges *LINK*

john lucas

>Larry I would recommend 2 things. One is to buy Bill Gumbine's video. It is excellent. The other is to try to find other woodturners. If you go to the AAW website you can find other clubs that might be near you.


http://www.woodturner.org

Re: fingernail bowl gouges

#5

Re: fingernail bowl gouges

Jim Swank

>What the others said, plus keep your gouge above the centerline, and pointed up (handle down). You really have to get a feel for introducing the gouge to the wood and rubbing the bevel. Use the tip more than the wings until you do.

Re: fingernail bowl gouges

#6

Re: fingernail bowl gouges

Russ Babbitt Jr.

>I would also add the video by David Ellsworth.

Re: fingernail bowl gouges

#7

Re: fingernail bowl gouges

C.W.Stivison

>Larry

Do not give up. I started turning on Saturday, used my new fingernail gouge on Sunday and it only threw the piece twice. Seems to me that the sharpness of the gouge, or the lack of it is the what makes the gouge catch. Ask me next Christmas.

Re: fingernail bowl gouges

#8

Re:John Jordan's old bowl turning......

Jamie Donaldson

>... tape is excellent for using the side ground gouge. I don't know if it has been released as a DVD, but he should consider the conversion- I'll ask him.

Re: fingernail bowl gouges

#9

Brad Vietje

Re: fingernail bowl gouges

Brad Vietje

>Larry & CW,

A sharp tool can help, but a sharp tool applied to the spinning wood at an inappropriate angle will catch every time. I like the advice already given by John to find other turners by finding a local club. You can usually see a turning demo, and many clubs have loaning libraries of tapes, DVD's and books you can borrow, which can also help. The newer books have better close-up photos of the tools in action, so you can better see how to position the tools for effecient cutting. Let us know where you are, and maybe someone on this list can arrange a visit, or perhaps you can visit them for some help.

Also, if you can rotate your lathe very slowly, or even by hand (might need an assiatant), and repeat the cuts that gave you problems, you can see how the catch develops -- this can help a lot.

Safe spinning,

Brad Vietje

Newbury, VT

Re: fingernail bowl gouges

#10

And as was mentioned in passing,

Don Henthorn

>Keep that bevel rubbing.