Finish for pens
C.W.Stivison
>I am going to turn some pens and would like some input on what kind of finish some of my new best friends use.
Knowledge You Can Build On — Est. 1998
Finish for pens
C.W.Stivison
>I am going to turn some pens and would like some input on what kind of finish some of my new best friends use.
It Depends.....
Jim Shaver Oakville, Ont.
>Hi C.W.
Well the finish I choose for a pen depends on the materials the pen is made from, at least for me. There are as many finishes and processes for pen makers as there are pen makers, so I hope you get lot�s of responses from pen makers to your post.
When I turn natural woods I sometimes use just a friction polish and wax, occasionally I will use CA as a finish, even lacquer. When I turn man made materials I usually just allow the materials properties (plastic, acrylic etc) to be the finish, sanding to 12000 Micromesh with a final application of a plastic polish to clean up the final swirl marks. I most commonly turn stabilized woods, I also use the same sanding process I use for man made materials and I finish with a conservators wax from Lee Valley.
Surface preparation all starts with the final pass of your turning-cutting tool of choice. I look at sanding as surface refinement, not shaping. I find the cleaner surface of tool marks that you start with at the sanding phase the better the result you will have. I know you will find that a good starting point, honing your turning tool one last time before the �Money Cut� will give you a great start.
Take care,
Jim
Re: After much expermentation
Terence Rice
>I use 2-3 coats of CA glue, smooth with 0000 steel wool and use Hut friction polish. It is fast, easy and durable.
Re: Finish for pens *LINK*
RiccoG
>Hi CW You can try Russ" Corner on the home page or go to his website
He has a good site, and he has DVD's about pen turning ad finishing. I purchased 2 in Dec. they are very helpful.
Re: Finish for pens
RevDoug
>Sand to 2000 and then one application of EEE paste and 4-6 applications of Shelawax. I used to add an application of Beeswax but now will allow the pen to rest for a few minutes before I assemble and will then take it to the Beall buffing wheels for a carnuba wax finish. Hard to beat.
Turn 'em round,