Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Chemistry and guilding

Posts

Chemistry and guilding

#1

Steven Antonucci

Chemistry and guilding

Steve Antonucci

>I've been messing with a form that has been languishing around my shop for years. Instead of tossing them, I tend to use them to experiment with new techniques and processes.

This walnut crotch hollowform has been burned, carved, and textured over a period of many years. I wasn't thrilled with it, so it went back on the shelf. A couple of years back, I sat in on a David Marks lecture on guilding and patination at the Woodworking Shows, and I decided to try it with a twist.

I guilded this form with a copper leaf (twice now, and you'll see why in a second). Now, I have a basic understanding of chemistry, and I know that copper will react in the presence of salt and an acid (I'm using vinegar). The result is very interesting, since the reaction is verdigris. I've read (and tested) that ammonia will produce more of a greenish color (currently, I'm getting a very turquoise blue).

Here's my dilemma: the copper leaf is so thin that it's largely being consumed by the already weak acids in the vinegar and the ammonia. Ideally, I'd have a mostly green and blue pot, but I'm really closer to 50/50. I'm debating cutting the solution again, but I'm looking for a more controlable reaction.

Any chemists out there that can help me out?

Picture of the current state of affairs below. I'm going for an over all green/blue covering. Not quite there yet.

Steve


img

Re: Chemistry and guilding

#2

Re: Chemistry and guilding

Mike Nelson

>No chemist here Steve but I sure like what I'm seeing. Wonder how a coat of wipe on Deft low gloss would look on that?

Re: Chemistry and guilding

#3

Re: Chemistry and guilding

Frank of Mantua NJ

>Hi Steve

I think its nice also. what if you wiped it with a whits wash or a very light blue wash ? That thing has some very interestint posabilitys.

Re: Chemistry and guilding

#4

Re: Chemistry and guilding

john lucas

>Steve I'm a long way from being knowledgeable about this stuff. I've done some of this sort of thing on regular thick copper and a little on some gold leaf. I think you may need to neutralize the acid. Possibly some baking soda.

Re: Chemistry and guilding

#5

JL

Re: Chemistry and guilding

JL

>Speaking as a chemist, diluting your solutions (or lowering your temperature) will generally slow down your reaction rates. Household vinegar runs about 5% acetic acid. Household ammonia can run as high as 10% ammonia (generally the range is from 5-10%). Acetic acid is an acid and ammonia is a base. If you have residual acetic acid, you will get ammonium acetate.

Other than dilution, you can try adding other salts (or metals) to slow or moderate the reaction. This may mess up your colors though.

Re: Chemistry and guilding

#6

Steven Antonucci

Too long since Chem lab

Steve Antonucci

>which Chet screaming about the poisonous gases being let off by dropping pennies in sulfuric acid...

So generally speaking, I'm guessing the copper acetate is what's left behind with the reaction? If I use ammonia, it's cuperic nitrate I think, and it's more green...

I'm using common household salts in the reaction, and I originally figured more salt was better (I think I read it somewhere before I started this "project"). I'm going to talk to my brother, who is an analytical chemist and will beat me to death with details. I'll post the response as follows.

Steve

Re: Chemistry and guilding

#7

Find a copper shop

Ray Thompson - Middletown, IN

>they will have the correct solutions to turn it anything from green to black. I know there is a shop in Indianapolis and he has them.

Ray

Re: Chemistry and guilding

#8

JL

Re: Too long since Chem lab

JL

>Not unless they changed the laws of chemistry recently. Probably would be one of the amine complexes of copper like tetramine copper. Nitrates are formed from nitric acid - HNO3.

Re: Chemistry and guilding

#9

Steven Antonucci

I got a D in chemistry :-)

Steve Antonucci

>I don't know-

I like the green and blue...it's some copper salt. My brother didn't really add a lot of color (pun intended).

Steve

Re: Chemistry and guilding

#10

Re: Find a copper shop

Bill Crommett

>I have no idea what to do to alter what you now have, but on raw copper I have gotten a great green oxidation color from urine.

Re: Chemistry and guilding

#11

Re: Find a copper shop

don lewonczyk

>Steve, Bill is right about the urine, I have a farm and anything the dogs, cats, horses or cows pee on that has copper will turn the green patina your looking for and it doesn't rub off easily. Not sure about human but one day I'll give it a try and let you know! DonL

Re: Chemistry and guilding

#12

Steven Antonucci

Urine, ammonia, vinegar

Steve Antonucci

>all of them work. Which one would you buy? :-)

Not sure all three are "marketable", if you know what I mean?

Steve

Re: Chemistry and guilding

#13

Oh, what a pretty vase....

Stuart Johnson

>how did you get such a lovely green color?

anything the dogs, cats, horses or cows pee on that has copper will turn the green patina..

Re: Chemistry and guilding

#14

Re: In the sports world today, a clean...

Jamie Donaldson

>... urine sample is VERY marketable!!!!!

Re: Chemistry and guilding

#15

Andy DiPietro

Re: Chemistry and guilding *LINK*

Andy DiPietro

>Hi Steve,

Just curious, I think we were in the same David Mark�s class a few years ago. It was either Somerset or Edison NJ. Mark�s had just flown in from California for the class and was really sick and could hardly talk. Do you remember that? I bought the video but never watched it or experiment with his techniques. Another item on my to-do list.

You should email him with your questions and mention that you were in his class.


http://www.djmarks.com/contact.asp