Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Anyone turned Sweet Gum wood?

Posts

Anyone turned Sweet Gum wood?

#1

Anyone turned Sweet Gum wood?

Allen Neighbors

>Today, a friend gave me the trunk and a few large limbs of a Sweet Gum tree (Liquidambar Styraciflua). The largest pieces are about 24" in diameter; the smallest about 14". 18-20 feet of it.

Due to trouble with my chainsaw, I only blanked out 5 large bowl blanks from a couple of pieces today. Tomorrow's another day. :o(

Some of it has some reddish/pinkish tint to it. Should I turn it or burn it? Other than 'round and 'round, how does it turn?

Re: Anyone turned Sweet Gum wood?

#2

Re: Anyone turned Sweet Gum wood?

Mike Rubes, Apex, NC

>Hi Allen,

I've turned a few bowls from sweetgum. If it was a live tree that was taken down, it could be very, very wet when you turn it! I've turned fresh sweetgum that was just short of a shower :)

The wood itself is a little bland to me, but the pieces I've caught very wet and turned behaved well. I let a few pieces spalt and that was nice, too. Long story short to me is that I don't think I would buy any, but for free, have at it!

Good luck, post a pic when you get some done.

Mike

Endgrain shaping rocks in Apex, NC!!!

Re: Anyone turned Sweet Gum wood?

#3

Re: Anyone turned Sweet Gum wood?

David Galloway

>One of my wood suppliers turned me on to sweet gum and I loved turning it. I find the coloration to vary...I am not sure why. It is worth turning, for sure. Enjoy. I love turning our native wood.

Re: Anyone turned Sweet Gum wood?

#4

Re: Anyone turned Sweet Gum wood?

Gary in Zirconia, NC

>I turned a couple pieces of it and it had pink in it also. The pink disappeared after a while though. I agree with the other posts, I like wood with more figure.

Re: Anyone turned Sweet Gum wood?

#5

Dick Hines

Every chance I get!

Dick Hines

>

Re: Anyone turned Sweet Gum wood?

#6

Re: How stable is it?

Allen Neighbors

>Turned wet to finish thickness?

Rough turn and dry before finish turning?

Dry the blanks, then turn to finish?

Re: Anyone turned Sweet Gum wood?

#7

Re: How stable is it?

Joe in a Cleveland suburb

>Allen.

According to the late Jon Arno in an article he wrote for FWW in May/June 2000, it's not a very stable wood compared with others. And I've been told that on the regular message board too. However, I guess it is used for cabinet work from time to time.

My house is full of redgum which I understand is the heartwood of sweetgum. All the woodwork on the first floor is this wood. It's has never been painted. It was built in 1924 and I understand it was a cheap secondary wood to use at that time. Kinda looks like plain maple to me. In fact, we are getting ready to paint it.

I have a pdf copy of the Arno article. Email if interested. Take out REMOVE in the email address.

Joe

Re: Anyone turned Sweet Gum wood?

#8

Re: Anyone turned Sweet Gum wood?

Bill White

>Better to turn than burn. You can put OUT a good fire with green sweetgum.

Bill

Re: Anyone turned Sweet Gum wood?

#9

Re: Anyone turned Sweet Gum wood?

Allen Neighbors

>Thanks for the info, everybody. I appreciate it.

Re: Anyone turned Sweet Gum wood?

#10

Re: Anyone turned Sweet Gum wood?

Jim

>I've gotten a couple of pieces from other people. One looked more like Poplar to me. Had green streaks in it. The other piece had color that looked a lot like Ambrosia Maple. It turns like Poplar to me though.

But I'll find out exactly what it looks like in a couple of weeks. I'm fixin to cut down at least one in my Yard. I'd hate it if it fell on the neighbors house.

Re: Anyone turned Sweet Gum wood?

#11

Dick Hines

Re: How stable is it?

Dick Hines

>I always try to turn my gum wet. I soak it in alcohol over night. The next morning I take it out of the alcohol and let drain until I get home from work. Then it is wrapped in a brown bag for a month or so. Once it is dry it is very stable.

Re: Anyone turned Sweet Gum wood?

#12

Re: How stable is it?

Allen Neighbors

>Thanks, Dick... that's what I wanted to hear.