Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Good beginners wood

Posts

Good beginners wood

#1

Good beginners wood

Henry - Olympia, WA

>Hi,

I am just getting started in wood turning. I got a Jet mini three years ago, but due to us moving and me having to build a new basement shop, I am only getting to it now :(

I am working my way through the exercises in Keith Rowley's book. I used basswood, but it does not seem to be a good wood to use. Any ideas on what would be a good wood for a beginner? I think he uses some European Pine for the exercises.

Thanks a lot!

-Henry

Re: Good beginners wood

#2

Re: Good beginners wood

Bob Fawcett

>Anything thats free. Green wood turns easy. Maybe leave out pine.

You can usually find poplar at the local big box and thats OK to practice on. It turns reasonably easily.

Re: Good beginners wood

#3

Re: Good beginners wood

Neal Addy

>I like Poplar as a practice wood. It is fairly soft and forgiving. It tears out easy but doesn't tend to come off in chunks on a catch.

Re: Good beginners wood

#4

Steven Antonucci

Whatever is local and free

Steve Antonucci

>pick up from your firewood pile. if you have to pay for it, it's probably not a good choice right now.

Green is good, too. Cuts easier.

Steve

Re: Good beginners wood

#5

Brad Vietje

Re: Good beginners wood

Brad Vietje

>Hi Henry,

Welcome to the addiction! Like others have already stated, almost any free hardwood will be good for practice. Many softwoods are difficult as the early and late seasonal growth (dark and light in the growth rings) can be very different in hardness, which leads to tear-out and lots of sanding (which has its own problems). In some ways, the best wood to learn on are the more difficult species.

Poplar and Basswood, or even dense Pine ought to be fine for practice, specifically because they are less desirable as turning woods, and often free or cheap. Probably the most important things to master are handling the tools (rubbing the bevel and angles of presentation to the wood), and sharpening, which is truly essential. A good strategy is to practice on more difficult woods (like Pine or Basswood) so by the time you can get nice, smooth cuts on the more difficult woods, you'll be surprized how nice the denser hardwoods will cut.

A local group will be a great resource as you learn -- seek out a turning club if you can find one within a few hour's drive.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Good beginners wood

#6

Re: Good beginners wood

Rick Davenport

>I live in the PacNW too.

You might look for some alder in your firewood pile.

(or steal some from your neighbor;-)

With all the windstorms we've had lately there is bound to be some maple or apple or cherry or alder lying on the ground right in your neighborhood.

And if you are ever near Edmonds, stop on by and I'll give you some good turning/training wood.

Rick

Edmonds, WA

Re: Good beginners wood

#7

Re: Good beginners wood

David Galloway

>anything free and green is fun. Dried poplar is cheap and great to practice spindle turning.

Re: Good beginners wood

#8

Re: Good beginners wood

Gary in Zirconia, NC

>Out where you live I'd get some big leaf maple. Turn it green if you can.

Re: Good beginners wood

#9

Re: Good beginners wood

Bill Crommett

>If you can find any constuction close by, latch onto some of the SPF off-cuts. It is amazing what some of our turnewers have done with 2 x 4 s in scrap.

Re: Good beginners wood

#10

Thanks!

Henry in Olympia, WA

>Thanks for all the input. I have some poplar in my pile I will try, and will go search through the neighborhood for downed trees :)

I did find out that there is a club in Olympia, and their next meeting is on the 25th.

-Henry

Re: Good beginners wood

#11

See you at the turning meeting *LINK*

Dave Smith, Longview, WA

>Hi Henry,

I was just going to post an invitation to the Woodturners of Olympia meeting. But you found us on your own.

Do you have a band saw? I can throw you a few pieces of green wood at the meeting. Let me know if you need them cut otherwise I will give you some small log sections.

Dave Smith

Too much white stuff on the ground in Longview, WA.


Woodturners of Olympia