Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Symposium Planners

Posts

Symposium Planners

#1

Symposium Planners

Ruth Niles

>I was just making out my schedule for 2007 shows for vendor's booths. I'm bummed, this is the first time I have to make a choice because shows are scheduled for the same date. I love the Albany show but they are on the same weekend as the Ohio Valley show, which I already registered there; bummer. North Carolina moved their show to a larger location and have a terrific lineup, I was so excited about having a booth there, they scheduled the same weekend as SWAT, where I did extremely well and have been getting a steady stream of orders from those wonderful Texans. I'm totally bummed because my shows are cut in 1/2 and I'm going to miss a lot of fun!

I'm surprised the planning committees wouldn't want their own weekend. Now NC is not that close to TX, except for me since my car can't read a map, but NY is too close to OH to do this to me!

just one vendors rant

Re: Symposium Planners

#2

Re: Symposium Planners

David Walser

>Ruth,

I hear your complaint. It would be nice if there were some way of coordinating all of this, wouldn't it?

By the by, are you planning on attending the Desert Woodturning Roundup in February?

Re: Symposium Planners

#3

Re: Symposium Planners

Lan Brady

>Ruth,

I sure hate that you will miss the NC Symposium. It will, by far, be our best one yet. We will miss the old location, but, it was just not able to handle the kind of event the clubs wanted.

As the world gets smaller, a common venue for schedules would be great. I hope we cross paths again some day!

Lan

Re: Symposium Planners

#4

Ruth Clone?

T Daniel

>We could use 2. :)

Re: Symposium Planners

#5

Re: I would hope that.....

Jamie Donaldson

>...symposia organizers would not attempt to compete for dates. Even though most attendees wouldn't have conflicts due to travel distances, many demonstrators and vendors will. The organizers would have all sorts of conflicts to take into consideration, but it would benefit all concerned to avoid conflicts when possible.

Re: Symposium Planners

#6

Re: Symposium Planners

Jerry Whitaker

><<<<<<>>>>>

Ruth....TEXAS wants you back!!! We will be in a larger and nicer place also....Wichita Falls, TX. And, this is where we have our largest attendance. We alternate between Wichita Falls and Temple, TX. We will make you happy that you came back. In the past, Texas has been known for its beer drinkers but it is an undeniable fact that fine wines are fast becoming the liquid of choice among those of us who love Mexican food. You come back...ya hear!!!!!!!!!!

Re: Symposium Planners

#7

Keith Tompkins

Re: Symposium Planners

Keith Tompkins

>I hear ya'Ruth....It gets even more complicated when you factor in the exhibition schedules. Question: Why, Why, Why are exhibit due dates ALL at the same time, and on or near the Christmas holiday? I guess the galleries and the aaw don't communicate with each other. It's the worst possible timing; guests and family plan to spend time together, customers want orders filled then, etc.. I literally didn't have time to shop for gifts.....still not done with pieces!

Re: Symposium Planners

#8

No Way TD

Jennifer@Indy.USA

>They broke Ruth's mold a long time ago. No such thing as a clone of her.

She's one of a kind :)

Re: Symposium Planners

#9

Re: Where and When in NC

Steve in NC

>Where is the NC Symposium going to be held.

Re: Symposium Planners

#10

Re: Ruth Clone?

john lucas

>TD If they cloned Ruth there would be some sort of Time Warp thing that would mess up the world.

Re: Symposium Planners

#11

Re: Symposium Planners *LINK*

Gary in Zirconia, NC

>The North Carolina Symposium will be in Greensboro this year. We will be meeting tomorrow to make more plans for it. It will be a much larger symposium than in the past. It is now a regional event.

Here is the link to the website for it: www.northcarolinawoodturning.com

Picking a date for it was very difficult with 11 different clubs sponsoring it. I am on the board to organize it. If you have any questions that the website can't answer, I might be able to. The website is just getting up so it will have more information as time goes.


http://www.northcarolinawoodturning.com

Re: Symposium Planners

#12

Re: Symposium Planners, Desert Roundup

Ruth Niles

>Dave, I really tried to work it in but I have to drive and I'm doing the show in FL next weekend then staying to visit my 2 granddaughters who I only get to see once a year so I try to stay as long as I can.

I've heard so much good about that show, next year is a good possibility.

Re: Symposium Planners

#13

Re: Where and When in NC

Ruth Niles

>Steve, the show is in the Greensboro Coliseum Oct. 5 - 7. I think they have a website but you'd have to do a google search for North Carolina Woodturning Symposium.

There's another really good one in CT June 1st weekend with some impressive headliners.

I want to do them all!

Re: Symposium Planners

#14

Thank you, John........ I think?!? : )

Ruth Niles

>

Re: Symposium Planners

#15

I agree, Jamie

Ruth Niles

>There are a lot of turners who go to the shows for the Instant Gallery and the Vendors and skip the demos. Of course, they've either seen them all or learn just as much (as David Ellsworth said) "in the halls". I love the demos and really do miss them since being a vendor, I can't do the demos (I do peek in when there's a lull on the floor).

There are a few new shows starting and some existing ones will have to perk up and pay closer attention to their dates and locations.

Re: Symposium Planners

#16

Texas it is

Ruth Niles

>Jerry, I already have my booth reservation. It's so nice to know you want me back! Just between you and me, don't tell anyone but I love a beer in the evening. : )

Re: Symposium Planners

#17

Keith, I never could figure out why

Ruth Niles

>Every year they insist on having Christmas at the busiest time of the year!?!?!

Re: Symposium Planners

#18

Gary, you might be able to answer

Ruth Niles

>my concerns, namely why did your group agree on the same date as SWAT? Was it because TX is further away and you thought it wouldn't affect either show? I don't believe there are any shows in the month of Sept. or Nov. There are 4 in the first 2 weeks of Oct. As a vendor this hurts me because I could have rented a booth at all 4 and had 4 times the fun!

Re: Symposium Planners

#19

Your Welcome :)))

john lucas

>

Re: Symposium Planners

#20

Re: Gary, you might be able to answer

Gary in Zirconia, NC

>Ruth, I was not on the board when the date was set, but I know they had truble getting a date that none of the clubs involved had already contracted demos for. It is difficult to plan a date that doesn't conflict since these dates are set one to two years in advance. I am sure neather of the symposium planners knew of each others plans until it was too late and contracts for convention halls and demonstrators were made. I will bring this up at our meeting in Greensburo tomorrow. Maybe there could be an area on the AAW site where dates could be displayed as soon as planners know. Then other planners would know what isn't available. We would sure like to have you in NC.

Re: Symposium Planners

#21

Wow!

Barbara Gill, Remlik VA

>I am from Greensboro; my mother still lives there. I will put those dates on my calendar!!

Re: Symposium Planners

#22

Great idea, Gary

Ruth Niles

>I think just about everyone checks the AAW site for events. Or even posting it on a few of the turning forums. I'll bet some of the demonstrators have to be booked at least 2 yrs. in advance. Gary, I am really bummed that I can't be in NC, I was quite excited about seeing a lot of my friends again.

Re: Symposium Planners

#23

AAW 2008

Ron in Drums PA

>The AAW 2008 symposium date is already set for June 20-22

Maybe other planners can start looking ahead for that year also?

Re: Symposium Planners

#24

Re: Great idea, Gary

Gary in Zirconia, NC

>Right Ruth, our club already has all it's demonstrators for 2008 and is ready to start on 2009.

Re: Symposium Planners

#25

Re: Where and When in NC

Steve in NC

>Thanks for the Information Ruth. I have not had a chance to go to any of these shows yet so I think I will put this one on my calendar. Do you have to be an AAW member to attend.

Steve