Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Scroll Chucks

Posts

Scroll Chucks

#1

Scroll Chucks

Joe in a Cleveland suburb

>Hello again.

The other day I posted asking about urns. Some of you emailed and posted suggesting I look into lidded boxes. Which I've been doing.

It looks like I would need a scroll chuck. I have a Jet Mini I bought 4 or so years ago. Looking at my Lee Valley catalog, I found:

1.) Teknatool Scroll Chuck.

2.) Oneway Scoll Chuck.

Other than about an $80 difference, what's the difference? For the little bit I will use it, is the Teknatool good enough?

Please correct me if I'm wrong, but it looks like the Teknatool Scroll Chuck kit for $109 is all I would need. Right? Also, if I get the Teknatool chuck, do I need the 3/4 X 16 tpi or the 1" X 8 tpi?

I must say, it is kinda fun coming over here once in a while from the hand tool and flat side. I'm usually on the regular message board everyday. I find if I go over to the hand tools side and to the turning side it balances things out so I don't drop off and down one of the slopes... :)

Thanks for the help,

Joe

Re: Scroll Chucks

#2

Also...

Joe in a Cleveland suburb

>What about this from Harbor Freight? Any reason this wouldn't work?

Thanks,

Joe

Re: Scroll Chucks

#3

Re: Scroll Chucks

Gordon Seto

>You will need 1" x 8 TPI spindle size for your Jet mini lathe.

Comparing the 2 chucks to some is like arguing about religion. I think both are among the best chucks; either will work for you.

I choose Nova chucks because all their jaws (except one) can be used on all sizes of Nova chucks. I don't have to re-purchase the jaws that I already have when I add a larger chuck. My two favorite jaws are the long nose and pin jaws.

I would not think the HF chucks is suitable for woodturning. They are knuckle-busters. A 4-jaw is more desirable because you can chuck up square blanks.

There are several off brand chucks that are supposed to be good value. The HF is not among them.

Gordon

Re: Scroll Chucks

#4

Steve Kubien

Re: Scroll Chucks

Steve Kubien

>Hi Joe, fancy seeing you over here!

I got my lathe a couple of months ago and got a Nova Midi chuck for Christmas. I really like it. It has already been said that other Nova jaws will fit this chuck and that was the clincher for me.

Good luck,

Steve Kubien - whose flat-work tools are looking lonely and wondering what they have done to upset me

Re: Scroll Chucks

#5

Re: Also...

john lucas

>No stay away from 3 jaw metal chucks. They won't hold the wood.

Re: Scroll Chucks

#6

Re: Scroll Chucks

john lucas

>Joe I like the Vicmarc chucks but Grizzly has a copy for $100 that is a good chuck.

You don't really need a chuck to do just one or two pieces. You can turn a tenon on both ends of the box and then glue the tenon into a recxurn the bottom. Fit the top on and turn it while turning the outside of the box. Then part the bottom off and turn a tenon on the wasteblock to fit the box. Turn the bottom of the box. That's how I did it for years before I got a chuck.

Re: Scroll Chucks

#7

Re: Scroll Chucks *LINK*

Darrell Feltmate

>Joe

As John said, chucks are not necessary, just nice. The 4-jaw turner's chuck is a fairly new addition to the wood turner's arsenal. We have been using face plates, screw chucks and glue chucks for a long time. That said, I like my One Way.


Around the Woods

Re: Scroll Chucks

#8

Richard Allen

Re: Scroll Chucks

Richard Allen

>I know this may sound silly but... The Jet Mini is a very popular lathe. There are bound to be some woodturners in your area who have a chuck which will work on a jet mini lathe. In fact with a little effort on your part I have no doubt that you could get some hands on help making an urn.

Re: Scroll Chucks

#9

Re: Scroll Chucks

Rick in Colgate, Wi

>Woodcraft is having a sale this coming weekend on Pinnacle chucks for $85, seems like a fair price for a scroll chuck.

Re: Scroll Chucks

#10

U have the Grizly chuck and it does everything I

Don Henthorn

>need it to do. However I still prefer a glue block over any chuck.

Re: Scroll Chucks

#11

Re: You're right, John, I bought

Allen Neighbors

>a three jaw chuck when I bought my Old Griz. Lost quite a few chunks of wood until I removed the jaws and cut some sharp teeth in the long side with my Dremel. Then I reversed them when I put them back. It now holds pretty well, but I don't need it since I bought my SN2s. :o)

A three jaw chuck is worthless for woodturning... without some careful modification.

Re: Scroll Chucks

#12

Re: Scroll Chucks

Ron McKinley

>I have two Tecnatools and one OneWay. I also have the Artisan from Craft Supplies which is the same as the Barracuda2 from Penn State. I probably use the Artisan the most since it comes with all the different jaws because I usually turn small items. Haven't found anything I couldn't handle with the Artisan/Barracuda2. Plus, you'll save a few bucks if you opt for the Artisan/Barracuda2.......Ron

Re: Scroll Chucks

#13

Thanks everybody. I know what to get now.

Joe in a Cleveland suburb

>