Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Make an Urn - what's it take?

Posts

Make an Urn - what's it take?

#1

Make an Urn - what's it take?

Joe in a Cleveland suburb

>Hi.

Last Saturday we had to have out 18 year old kitty put to sleep.

She is being cremated. I was planning on making a small box for her, Gizmo, out of some scrap figured maple or something. Then I started thinking about my little Jet and wondered how difficult would it be to turn a small simple urn.

My turning experience is limited to once or twice a year use making knobs! Also, I don't have any fancy attachments/jigs and so on for bowl making. Just the faceplate, a drill chuck and a limited number of gouges and so on.

What does it take to make something like an urn? Are there any online videos showing any of the steps involved? I recall a video at our local library I plan to check out this weekend, but I thought I'd come here and ask the experts.

Maybe this would be too much due to lack of experience on my part. Maybe I shouldn't use this particular job as a learning experiment. So I might just end up making a nice little box for her. But, again, just thought I'd see what you folks think.

I tried searching messages before posting this question but I keep coming up with tons of messages due to the string "urn" which is of course in a lot of words... maybe I did it wrong.

Thank you.

Joe

Re: Make an Urn - what's it take?

#2

Re: Make an Urn - what's it take?

Ralph

>Think more lidded box then urn. There is lots of good info out there, I just lost a URL to a good site, but there is lots of info

Re: Make an Urn - what's it take?

#3

Re: Make an Urn - what's it take?

David Breth

>First, as a cat guy, I'm sorry to hear that you lost your pal. It doesn't seem to matter how advanced in years they are, it isn't the least bit enjoyable. Gizmo certainly had a pretty good run at the age of 18, however. Hopefully it was a healthy 18 years.

With respect to the urn, a hollowing project can be pretty involved, I would think especially for an inexperienced turner, and some more specialized tools would typically be in order.

What I would recommend is a lathe-turned box, for which you seal the top. If you envision a box with a lid that fits in a recess, you could put the cremains in the box, then glue the lid. You could do something fairly simple, that would look very nice, and really accomplish the same thing you're after.

Last year, I made a coin bank for my son, and I'll send you a photo if I can lay my hands on the photo, because the shape of it would help flesh out the lidded box concept.

David B.

Re: Make an Urn - what's it take?

#4

Re: Make an Urn - what's it take?

Russ Babbitt Jr.

>I will agree with the others that a box would better fit you lathe, tools and skills. Look for a book by Chris Stott. Turned Boxes 50 Designs. He begins with a very basic box that should fit your needs. Videos, I would also look for Chris Stott or Bonnie Klein. Check the web for urns to find the size required for cats. The information is out there.

Remember the good times. Then go out and get another cat to love.

Re: Make an Urn - what's it take?

#5

Re: Make an Urn - what's it take? *LINK*

tek-Brunswick, Ohio

>Here is another take on what you want to do! You seem to have wood working experience. Look up segmented turnings. There is a lot of work joinery but the turning is a lot simpler. If you are going to seal the lid you wouldn't even have to turn the inside. I belong to the North Coast Woodturners. WE meet in Beautiful Cleveland, Ohio. Tomorrow, Saturday, just happens to be our meeting day. We meet in the basement of the Rockler Store. Across the street from Best Buys, on Brookpark Rd, just West of Ridge Rd. Come check us out if you have time. Here is the link to our January newsletter. If you come my name is Tom Knapp, I'm the vice president, which means I bring the donuts and bagels. By the way our demonstration tomorrow is on how to turn a hollow vase.


http://ncwt.org/newsletters/2007%20Newsletters/2007_01/ncwt_07_01.indd.pdf

Re: Make an Urn - what's it take?

#6

time

tek-Brunswick, Ohio

>We meet at 9:30 AM. The doors open at 9:00 AM.

Re: Make an Urn - what's it take?

#7

Re: Make an Urn - what's it take?

John Lucas

>Rather than hollowing an Urn you could turn it in two parts. Turn a tenon for a chuck or faceplate on both ends of your blank. then turn and Urn shape and part it in half at the thickest part. mount each of these blanks on the chuck or faceplate and turn away the inside. Then simply glue them back to together and final shape the outside. If you leave the original marks from the initial turning between center you should be able to mount the whole thing back between center or between the chuck and tailscenter for the final turning and sanding. When you have it all shaped right cut the top down to a very small tenon and then cut this off by hand. Carve it away and drill a hole in the top and make a seperate piece as the lid.

This isn't any more complicated than making a box. I'm sorry for you loss. I love my animals very much.

Re: Make an Urn - what's it take?

#8

Re: Make an Urn - what's it take?

Greg Mitchell

>JOE SORRY FOR YOUR LOSS. THE ONLY THING I MIGHT ADD IS IF YOU MAKE AN ERN, THE SIZE SHOULD BE AT LEAST ONE CUBIC INCH PER POUND.

Re: Make an Urn - what's it take?

#9

Re: Make an Urn - what's it take?

Joe in a Cleveland suburb

>Thanks tek. Tomorrow morning won't work for me. I'm aware of your club and its meetings. I hope to make it some day.

Thanks.

Joe

Re: Make an Urn - what's it take?

#10

Re: Make an Urn - what's it take? *LINK*

RiccoG

>Hi Joe

Sorry for the loss of your cat. You can check out Bill Grumbines site.He has a section about Urns. Good luck RiccoG


http://www.wonderfulwood.com

Re: Make an Urn - what's it take?

#11

Re: Make an Urn - what's it take?

Jim King

>Here are some people sized ones. Very simple to make but the drying is important as you dont want it to crack latter.


img