How long is an Ellsworth bowl gouge?
Albertabob
>A pal of mine is wanting to build a case for the 5/8" Ellsworth gouge but lacks the dimensions. (A gift)
Could one of you kind souls check yours out and get back to me.
TIA Bob
Knowledge You Can Build On — Est. 1998
How long is an Ellsworth bowl gouge?
Albertabob
>A pal of mine is wanting to build a case for the 5/8" Ellsworth gouge but lacks the dimensions. (A gift)
Could one of you kind souls check yours out and get back to me.
TIA Bob
Re: How long is an Ellsworth bowl gouge?
Ed in Leaside (Toronto, Ontario)
>We have a new, untouched, unsharpened, etc. in the shop. I'll measure and post when I return this evening, sometime after 8.
Ed
Re: How long is an Ellsworth bowl gouge?
albertabob
>Thanks very much Ed.
Bob
Re: How long is an Ellsworth bowl gouge?
Cyril Griesbach
>My David Ellsworth signature gouge by Crown tools is 27 1/4" long. It's been sharpened more than a few times.
Cyril
Re: How long is an Ellsworth bowl gouge?
Russ Babbitt Jr.
>Depends on which brand you are talking about. Crown makes the Ellsworth gouge sold by Packard and they give the measurement as about 27". Henry Taylor also make the Ellsworth gouge available through Craft Supply and it measurement is 25 1/2". Both are considered Ellsworth gouges.
Re: How long is an Ellsworth bowl gouge?
albertabob
>Thanks very much fellas.
the takes the guess work out of it.
Bob
Re: How long is an Ellsworth bowl gouge?
Ed in Leaside (Toronto, Ontario)
>Hi Bob,
Our's is a Crown and it measures 27 11/16" LOA. If you're making a custom case there should be a support at the ferrule. So here's a few more measurements.
Shaft: 5/8 dia x 10 1/8
Ferrule: 1 1/4 dia x 3/4
Largest Dia of Handle: 1 3/4 @ 12 1/4 from tip
I could do an eh-eye file if you'd like.
Ed