Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

OT- Mobile Bases

Posts

OT- Mobile Bases

#1

OT- Mobile Bases

Stuart Johnson

>Why do mobile bases come with two swivel wheels and two fixed? I just bought a drum sander and added the mobile base. It is anything but mobile. If pushing in a straight line a gentle turn is not a problem but moving it around the work bench involved some heavy duty sideways pushing on the fixed wheels. It seems if all four wheels swiveled it would be easier to move about. I've also noticed this on bases installed on my jointer and table saw. The sander is going to need to be moved a bit more often so if there is no real reason not to I'll change the fixed wheels.

Re: OT- Mobile Bases

#2

Re: OT- Mobile Bases

David Walser

>There are three potential reasons:

1) Having two fixed wheels can make it easier to push the machine in a straight line. If all four wheels swivel, some loads have a tendency to try to "swap ends" rather than track a straight line.

B) Having two fixed wheels may make it easier to have the machine "stay" in one position when it's being used. If the fixed wheels are 90 degrees to the load you are putting on the machine, the fixed wheels act more like "feet" than wheels even if the wheels are not locked. Swivel wheels are apt to go with the flow, so to speak.

III) Cost.

In a small shop, I'd think being able to turn either end of the machine would be of more value than straight tracking over a distance, so I'd discount reason number 1. The second reason is not even a reason if your mobile base lifts the wheels off the floor when the machine is positioned for use.

Re: OT- Mobile Bases

#3

Re: OT- Mobile Bases

Bob Fawcett

>It also depends on which end has the fixed wheels, and which the swivel. It is usually easier to steer if the fixed wheels are at the front, the opposite of a car. You have to make adjustments to how you "drive". Works like a forklift, which have the steering wheels in the rear.