Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Stihl problem

Posts

Stihl problem

#1

Stihl problem

Ed Moore

>Below I described how my Stihl MS310 had a crankshaft problem after 3 1/2 years of moderate use. Actually, I think it was the connecting rod that cracked and a bearing was slipping that caused the engine to bind. It was declared economically unrepairable.

It was suggested that I contact Stihl and see if they might be interested in ameliorating the situation. I got on their website and sent them an e-mail explaining the situation. I did not suggest a solution, but indicated my disappointment. I also pointed out that I had upgraded to an MS361.

Yesterday, for a disabled neighbor, I sawed up most of the limbs of a large poplar tree that fell over a few months ago. I DO like the new saw and the additional power. And sawing poplar is a lot easier than red oak. ;^D

I will let you know of the response from Stihl, if any. In the e-mail I mentioned the discussion here.

Ed

Re: Stihl problem

#2

You sawed the limbs of your ......

Barry Irby

>Disabled neighbor? Mad man! I'm telling Ellis! You should be banned from the Island.

Re: Stihl problem

#3

Rough old geezer, aren't I? ;^D

Ed Moore

>

Re: Stihl problem

#4

Stihl steps up to plate

Ed Moore

>I have been in touch with Stihl and Stihl has stepped up to the plate and offered to replace the complete crankshaft assembly. I believe that this is fair and generous for a saw that is 3 1/2 years old with a one year warranty. There were some earlier misunderstandings about costs because of the distinction between "crankshaft" and "crankshaft assembly". I think there is a big $$$ difference between them. Now I must find out how much the labor will be to reassemble the saw. I will report back if there is a happy ending to my chainsaw saga.

Ed

Re: Stihl problem

#5

Re: Stihl steps up to plate

Mike Nelson

>Glad to hear it worked out Ed. I would think the cost would be fairly low for your repairman to reassemble the saw. If not you should be able to find a schematic and even repair instructions on the web. Putting it back together shouldn't be all that hard, just remember to oil all moving parts. Mike

Re: Stihl problem

#6

Expected cost

Ed Moore

>Mike,

Thanks for the original suggestion. Stihl offered to provide a new crankcase assembly. My expected cost is about $160, which is fair. This is to be confirmed on Monday after the dealer chats with the Stihl tech rep and his repair guy.

There is NO WAY I would attempt to take the bag of parts and reassemble them. ;^D

Ed