Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Don Derry Hollowing Rig Laser Light

Posts

Don Derry Hollowing Rig Laser Light

#1

Don Derry Hollowing Rig Laser Light

eliot d

>Does anyone have one of these? Mine is developing weird behaviors. The brightness of the light varies all over the place in a random kind of way as I turn. If it's the batteries, I can't see any way to change them. I suppose I could always spring for a new laser light; but this one is almost new.

Frustrated Don Derry HF system user.

Re: Don Derry Hollowing Rig Laser Light

#2

Re: Don Derry Hollowing Rig Laser Light

RK in Milwaukee

>Just had that happen with my Jamison setup. Turns out that the battery contacts needed cleaning. I'll bet that your laser comes apart by unscrewing the barrel somewhere. Take it apart and clean the battery contacts and you will probly be back in business.

Ron

Re: Don Derry Hollowing Rig Laser Light

#3

Re: Don Derry Hollowing Rig Laser Light

John Lucas

>eliot I've had that happen with every lazar pointer I've had. I think the springs are too weak that push on the batteries. I'm going to try to take my new one apart and stretch the spring to see if that is the problem. It works absoulutely fabulous and then all the sudden will just stop and not work. you pull the batteries out several times and it will start working again. I thought it might have some sort of thermal switch but I've had it happen after a very short time so i don't think that's it.

Re: Don Derry Hollowing Rig Laser Light

#4

Re: Don Derry Hollowing Rig Laser Light

Charlie Anderson

>You could fly to the Desert Woodturning Symposium next week and ask Don in person.

Re: Don Derry Hollowing Rig Laser Light

#5

Re: Don Derry Hollowing Rig Laser Light *LINK*

Sean Troy

>When I find a tool supplier that I like, I always recommend them. As I have recommended many times before, check out the one John Lea sells on his web site, I use it and it's built like a tank.Small price to match it's small size.


http://www.woodturningtools.net

Re: Don Derry Hollowing Rig Laser Light

#6

Re: Don Derry Hollowing Rig Laser Light

Mark Wollschlager

>Hi Eliot,

On my Derry rig laser, the barrel unscrews just behind the silver band on the long end.

One modification Don has made to the lasers he supplied was to place a thin plastic washer on the laser end of the inside of the barrel.

This is to provide support to the batteries to keep them in contact with the far end of the barrel.

He said that the weight of the batteries would compress the spring and they would lose contact.

If the washer is missing the batteries might be bouncing a little.

Mine got a bit erratic when the batteries were low. New cells fixed it up.

Mark.

Re: Don Derry Hollowing Rig Laser Light

#7

Re: Don Derry Hollowing Rig Laser Light

Joe Flemig

>Charlie - next month - not next week.

Re: Don Derry Hollowing Rig Laser Light

#8

Re: Don Derry Hollowing Rig Laser Light

Charlie Anderson

>Thanks, Joe. I've been having trouble telling the difference between Jan and Feb. I'm president of our civic assoc. Our next meeting is Jan 14 and I sent out a notice our next meeting would be Valentine's Day. LOL

Re: Don Derry Hollowing Rig Laser Light

#9

Re: Don Derry Hollowing Rig Laser Light

eliot d

>Mark, Your response hit the barrel on the head. I couldn't figure out how to get at the batteries; now I know. And I'm sure the explanation about the batteries bouncing around is the problem, because the brightness definitely changes depending on the vibration of the tool. I'll fool with a plastic ring first; if that doesn't work, I'll try changing the batteries (but it is bright enough when it's not bouncing around; so I think it must be the pressure in there.) Thanks. I hope Don gets wind of all this and springs for a better light. He seemed more than willing to go the extra mile when I met him briefly at a demo and bought the tool from him.

Re: Don Derry Hollowing Rig Laser Light

#10

Don at John C. Campbell next week

David Galloway

>Don Derry will be the first turner to break in the new woodturning studio at John C. Campbell next week. I will pass on the remarks from this thread. He is always willing to tweek the system. I enjoy mine a great deal and share the issues with the laser.