Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Wood burning suggestions?

Posts

Wood burning suggestions?

#1

Wood burning suggestions?

Bert Workman

>I know this has been discussed before but I wasn't in the market back then so I didn't pay attention like I should have.

I'm looking at the Razortip and the Optima for doing some basic enhancement on some of my work. The Cub from Craft Supplies is on the list as well but the others seem to be a bit more robust. Are there other options? I don't have the time or patience to build my own like some of you have - though it would be nice.

Anybody willing to share a little wisdom with me and make a recommendation or two?

Thanks so much,

Bert

Re: Wood burning suggestions?

#2

Re: Wood burning suggestions?

georgetroy

>In addition to the two brands of woodburning devices mentioned, you may also consider the Detail Master. Keep your heat low until you get use to the burners. I highly recomend an Otpic Visor to magnify your work makes a big difference, sure does for me. I think the Club is used mostly for signing names, thats what I do with mine. GT

Re: Wood burning suggestions?

#3

Hey that search button is pretty cool.

Bert -again

>I just browsed back for 6 months worth of messages and found a lot of what I was hoping to see.

THIS BOARD ROCKS.

Just wanted to say that.

Bert

Re: Wood burning suggestions?

#4

Keith Tompkins

Re: Wood burning suggestions?

Keith Tompkins

>HI Bert, I have the Cub....probably not enough burner for continuous usage....I fried my wiring to the burner tip....to be fair though, I had used it for several hours straight. The dealer where I purchased it replaced it for free, however. The replacement harness is much heavier, however. The handpiece gets extremely hot, the others may be cooler to operate.

Re: Wood burning suggestions?

#5

Re: Wood burning suggestions?

Russ Babbitt

>I have the Detai Master Sabre IV and really like it. Checkout Burnmaster. These came out after I got my Detail Master and I have heard good things about them.

Re: Wood burning suggestions?

#6

Re: Wood burning suggestions?

Phil Powell

>You should take a look at the Optima 1 burner from PJL Enterprises. It's an excellent wood burner and the hand pieces stay cool after long periods of use. I like mine a lot.

Re: Wood burning suggestions?

#7

Hands down: Burnmaster

Molly Winton

>I recommend this unit over any others on the market for $$ value; versatility - it will accept any pens on the market no matter the manufacturer by supplying adapter cords at no additional fee; interior breaker to prevent frying the interior if you get a power surge (you can reset yourself); most powerful on the market (that I know of) at 130 watts for either the Hawk (one port), or Eagle (two ports). Give it's price (Hawk approx. $95.95; and Eagle approx. $115.95) I can't imagine why you'd want to purchase any other unit.

Disclaimer: I have interest in this manufacturer, other than as a satisfied customer.

Re: Wood burning suggestions?

#8

Re: Wood burning suggestions?

Cyril Griesbach

>Hmmm...sounds like the which lathe question but I'll chime in here and say that I'm quite satisfied with my Colewood burner.

Cyril

Re: Wood burning suggestions?

#9

Whose tips are recommended?

Chip in Plano

>I've got Christmas bucks to spend !! I had already settled on the Burnmaster Eagle. What tips are the most common and best value?

Re: Wood burning suggestions?

#10

Re: Wood burning suggestions?

john lucas

>Me too. I had the colewood before and I like the Optima better.

Re: Wood burning suggestions?

#11

Re: Wood burning suggestions?

Rick Allen

>There are a lot of different power units available. The Detail Master line is well made and easy to use. The Burnmaster has a good following and is made of more generic parts for a less expensive, and very effective unit. The optima is also well thought of. Those are the three I would recommend.

Pens are also a concern. Detail Master tends to make the most robust pens. If you want to burn big and deep the Detail Master pens are hard to beat. Razortip pens are more delicate which give you an opportunity for greater detail. The smallest ball tip is terrific for signing your work.

More important than the power unit or the pens is instruction. Taking a class in woodburning will do more for you ability to burn in wood what you have in your mind than all the power units and pens available. A distant second to taking a class is watching a demo on woodburing, third would be a video, fourth is a book, fifth is trial and error.

Good Luck