Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Pen & Pen boxes

Posts

Pen & Pen boxes

#1

Pen & Pen boxes

bmac

>I have been working on these for a very good friend of mine. His father passed away in November. As his Father was an Army veteran he was given a gun salute. My friend asked if I could make him and his brother a pen out of the spent cartridges. This is what I came up with. His Father was a life long Texan so I wanted to use a native Texas wood, mesquite.

I had their Fathers name and his birth and death dates laser engraved in the pen and in the top of the box I inlayed a Texas concho.

Bobby

Louisiana


img

Re: Pen & Pen boxes

#2

Re: Pen & Pen boxes 

bmac

>


img

Re: Pen & Pen boxes

#3

Re: Pen & Pen boxes

Norm Smith in Nova Scotia

>Bobby, great job, great idea, beautiful work. I am sure that they will be cherished.

Norm

Re: Pen & Pen boxes

#4

Re: Pen & Pen boxes

Ken Romines

>Bobby

I've turned quite a bit but have never tried a pen. Did you use a kit, what size etc.

I still have the shells from my dad's funeral salute and I really like the idea and the execution---good job, good idea.

Thanks in advance

Ken

Re: Pen & Pen boxes

#5

Re: Pen & Pen boxes

Cyril Griesbach

>Bobby,

Outstanding, and what a wonderful tribute. I'm sure they will be cherished forever.

Cyril

Re: Pen & Pen boxes

#6

Re: Pen & Pen boxes

Wayne Kuhn

>You have some really lucky friends, thier Pops and yourself will never be forgotten. Absolutley beautiful all the way around.

Re: Pen & Pen boxes

#7

Re: Pen & Pen boxes

Allen Neighbors

>Fantastic! What a set of heirlooms!

Re: Pen & Pen boxes

#8

Re: Pen & Pen boxes

bmac

>Ken, cartridge pens are not that hard to make. Normally, I use a .308 cartridge, but I would guess that any cartridge could be used. You just have to find a pen kit to match the size of the taper on the cartridge. Also, because of the length of some cartridges, you have to make sure you have enough of the transmission sticking out for the top.

As to making the pen, I drill out the primer, make sure it's a spent cartridge, with a 5/16 drill bit. Then I insert a size 2018 arrow shaft into the cartridge. It should just fit in the taper end of the cartridge. On a new cartridge that has never been fired, it's a tight fit, but it will fit. Then I insert the brass tube from a slimline pen kit into the arrow shaft. Depending on the length of the cartridge, you may have to add some tubing or cut off some tubing. From here it's just like any other pen kit, you just don't have to turn the bottom part.