Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

3 Turning Goals for 2007

Posts

3 Turning Goals for 2007

#1

3 Turning Goals for 2007

Mike Brazeau

>I am sure you are no better than I at keeping New Year's Resolutions. How about a short list of three goals involving our favorite pastime, Woodturning for 2007. Maybe there is more of a chance of keeping them. Mine are: Make some pens for Jim Shaver's Pens for Peacemakers project, explore offset turning and initiate and complete a fairly major multi-component project. Happy New Year to all.

Mike

Re: 3 Turning Goals for 2007

#2

Re: 3 Turning Goals for 2007

Stuart Johnson

>1. Turn pens for Jim Shaver's Peace Keepers project. (started)

2. Learn how to make complex segmented rings.

3. Improve my spindle turning ability.

Re: 3 Turning Goals for 2007

#3

Re: 3 Turning Goals for 2007

bowlman

>1. Finish setting up central DC

2. Purchase and begin using a coring system

3. Increase productivity/output of gallery turnings

Re: 3 Turning Goals for 2007

#4

Re: 3 Turning Goals for 2007

Peter Hyde

>1 Stop with the free wood collecting

2 Get around to building all the tools and jigs that I lust after

3 Listen Look and Learn a lot more than I have been doing!

Re: 3 Turning Goals for 2007

#5

#3 on Hydes list

Mike Nelson

>

Re: 3 Turning Goals for 2007

#6

Re: 3 Turning Goals for 2007

Tom Libby

>Learn hollowing, segmented stuff, and selling.

Yappy Hew Near

Re: 3 Turning Goals for 2007

#7

George Balock

Re: 3 Turning Goals for 2007

George Balock

>As per my resolution below:

1) Keep my shop cleaner so I don't have to spend three days cleaaning it.

2) Slow down my turning. I want to incorporate more off the lathe work into my turnings.

3) Order my 2436 by the end of the year.

Re: 3 Turning Goals for 2007

#8

Keith Tompkins

Re: 3 Turning Goals for 2007

Keith Tompkins

>Hi Mike, What better time of year to reflect upon the previous year, and look forward to the next? Personally, I have found that setting goals, then striving to achieve them, is the key to moving forward...each year I make a game-plan, then set out to acomplish it. 2006 was a banner year for me, as I managed to reach every goal I set out for myself.. and then some. Perhaps the best thing was seeing my work displayed at SOFA, NY; more of a dream than a goal. I have certainly been blessed.

So for 2007:

1. Bring a signature tool to market..already in the works.

2. Finish at least one of the several articles I started.

3. Spend more time with my wife and family: most important of all.

Re: 3 Turning Goals for 2007

#9

Re: 3 Turning Goals for 2007

john lucas

>Great question. I have a list a mile long and most concern improving the shop or my techniques.

My main goals for the next 6 months are.

1. Learn metal spinning. I've been wanting to do it for years. I have the skills to make the tools and my secretaries husband does this on his job and has said he would help.

2. Get the house ready for all the relatives. My son is graduating in may and everyone is coming up for the event. I've spent almost all my time working on the shop since I move in here. Now it's time to work on the house.

3. Try to finish some of the articles that I've started. I have a ton and I just can't seem to work on them.

Re: 3 Turning Goals for 2007

#10

Richard Allen

Re: 3 Turning Goals for 2007

Richard Allen

>1. I have some table started which need to be finished there are some unknowns in the completion of those tables. Turning those unknowns into knowns would be GREAT.

2. I have a collaborative project in my head which I hope to get started and finished. The unknowns being getting several folks working towards a plan and a goal together.

3. There is a series of platters I would like to do which would grow on the platters I have been doing for several years. Perhaps the growth will make me smile instead of shake my head.

Re: 3 Turning Goals for 2007

#11

Brad Vietje

Re: 3 Turning Goals for 2007

Brad Vietje

>For me this is easy:

1. Finish off a shop area in my barn

2. Insulate & heat above

3. Spend a little more time turning

Happy New Year, everyone,

Brad Vietje

Newbury, VT

Re: 3 Turning Goals for 2007

#12

Re: 3 Turning Goals for 2007

Terry Quiram, Roanoke Illinois

>1: Finish hooking up the dust collector to the lathe.\

2: Stop bringing home so damn much wood.

3: Finish as many of the 200+ rough turned bowls as possible.

Re: 3 Turning Goals for 2007

#13

Dick Hines

Re: 3 Turning Goals for 2007

Dick Hines

>I only have one goal for 2007. That is to garage in half. I have been trying to do it since 2005. Maybe this year.

Re: 3 Turning Goals for 2007

#14

Re: 3 Turning Goals for 2007

Mike Nelson

>Make it three, smoothly finish the insides of hollow forms and find a way to suck the dust from my turnings without freezing to death!

Re: 3 Turning Goals for 2007

#15

Re: 3 Turning Goals for 2007

keith zimmerman, Normal IL

>1. Think outside the box more and follow through on ideas that I come up with.

2. Build and test a steadyrest of.

3. Practice sharpening, practice turning, practice finishing, and then go and practice some more.

keithz

Re: 3 Turning Goals for 2007

#16

Re: 3 Turning Goals for 2007

Brian Hahn in SW Wisconsin

>1. Have fun

2. Explore some of the ideas that I've been kicking around for a while and learn new stuff in the process

3. Stop and smell the roses periodically

Re: 3 Turning Goals for 2007

#17

Steven Antonucci

3 goals for every year-

Steve Antonucci

>1.) Improve the quality of my output, whatever it is (pens, bowls, hollowforms...) via better tool handling and sanding rigour.

2.) Slowly introduce my children to the joy of shop time SAFELY. There are very few things that we can learn at an early age and carry through our entire lives. "Lyf so short, the craft so long to learn".

3.) Sell some things. Never been the focus of why I turn, but I think it's about time I clear some shelf space. Extra cash can go back into the "business"...

Steve

Re: 3 Turning Goals for 2007

#18

Re: 3 Turning Goals for 2007

David Breth

>1) my primary goal is to do a craft show. Not a big huge show, but a low-key affair like a church craft show - get my feet wet, see what it is like to prepare, display, endure, execute a show. I feel like what I'm making now versus a year ago might be worthy of a customer-look, and am interested to find out.

2) Improve spindle work. I've got practice pieces of wood set aside, but do I see me taking the time to hit it?

3) Sharpen my sharpening skills.

David B.