Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Champagne bucket in process

Posts

Champagne bucket in process

#1

Champagne bucket in process

Jim King

>A first attempt using small pieces glued up for turning . Maybe it qualifies as a segmented piece. It is the ice container for a table side champagne ice bucket. The size is about 11� tall by 11� in dia.. It was roughed out with 12 sections for each ring and glued up and hand sanded and then glued ring on top of ring all with white carpenters glue. The stand will be a large inside out turning as well as an inside out handle on top of the cover. It should be about 54� tall when done in a few days. The bucket has 192 pieces and all is made of pink flame wood kiln dried � inch boards. Kind of thrilling turning the inside and hoping it stayed glued to that little peice of bloodwood. (For pink champagne)


img

Re: Champagne bucket in process

#2

Re: Champagne bucket in process

David Walser

>Jim,

It looks like it will be a stunning piece. Please post a picture of the completed project.

Given the use, I think I might have used a different glue. I'm always afraid white glue joints might come apart if they get too wet. In addition to wetness, your ice bucket will need to contend with large and relatively rapid changes in temperature. Would one of the polyurethane glues been a better choice for this application? (I'm asking. I realized I never would have thought of using white glue and am wondering if I've been wrong all these years.)

Re: Champagne bucket in process

#3

Re: Champagne bucket in process

Jim King

>David: We are just past the end of the world here 2500 miles up the Amazon with no roads coming here and are thankful for whatever we have in the market. White or yellow glue seems to work well if the wood is dry. The epoxy floor finish works well as I posted a photo of a beer cooler of simalar design a few weeks ago and it is doing well after being well used.