�The Art of Wood Turning� *LINK*
Ron in Drums PA
>One of the Christmas gifts I received was a book going by the title of �The Art of Wood Turning� by William Klene
If the title and the author don�t sound familiar it is because the book was written in 1921. It�s interesting to find out what has and what has not changed over the years.
There weren�t bowl gouges or scroll chucks back then. Bowls where hollowed out with a round scraper. There where skews and skew scrapers. The skew scraper looks like a square scraper with a longer bevel on just one side. And here�s the kicker, it�s used like a skew in a planning mode with the bevel facing you. I plan on trying that one. There where three version of the skew scraper, flat, right-hand and left- hand. The later two where ground on an angle.
There is a chapter about sharpening on a wheel then honing (whetting) it with a stone. Same arguments then as today as to why this is important.
It was funny to note that this book was intended for boys as a school book and for home craftsmen once electric motors on lathes and electric outlets to plug in the lathe become more common.
The chapter named �Segment Work� caught my attention. There is project for an ashtray stand where the �bowl� had 6 segments. There is also a 6 segmented serving tray and a captains wheel clock
I chuckled when I read the section about finishes on any type of item that will be used for food.
�No Finish Is The Best Finish�, it said.
I couldn�t help thinking of Russ Fairfield.
All in all, I enjoyed reading this book. It made me realize what is old is new once again.
Wood Turning Exchange 2007



